$40-$60 Off RC Cars
1 - 8 of 8 products
FMS 1:12 TOYOTA FJ45 Pickup Truck RTR
Description
1:12 TOYOTA FJ45 Pickup Truck
To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.
The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.
The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.
What's in the box:
- 1 x 1:12 TOYOTA FJ45 RTR
- 1 x 2.4G Transmitter
- 1 x 2-in-1 Receiver (installed)
- 1 x 180 Brushed Motor (installed)
- 1 x 9g Plastic Digital Servo (installed)
- 1 x 2S 7.4V 380mAh Battery with PCM
- 1 x USB Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 345mm
- Width: 127mm
- Height: 124mm
- Wheel base: 270mm
- Tire: D:60mm , W:15mm
- Ground clearance: 29mm
- Approach angle: 58°
- Departure angle: 29.9°
- The Highest Driving speed: 8km/h
- Remote control distance: 30m
- Play time: 20 minute
EAZYRC 1:18 Chevrolet Colorado Off-Road Truck RTR Brushless Version
Description
Overview
If you're looking for your first 1:18 RC monster truck, look no further than the EAZYRC 1:18 Chevrolet Colorado, licensed by General Motors LLC. 17g digital servo, 45A brushless ESC, 2S Li-Po battery, and a 4-pole high-torque brushless motor provide sufficient power for the full-time four-wheel drive system. The top speed reaches 45 km/h.
The chassis uses a honeycomb structure with metal reinforcements to increase the overall strength, and the durability is superior to that of similar products. The all-metal gears and metal differentials plus durable steel drive shafts, provide reliable heavy-duty transmission and can withstand extreme high-speed impacts. The whole vehicle adopts a modular chassis design so that the power system, electronic equipment, and differential components are easy to disassemble and the daily vehicle maintenance is simple. The all-metal oil-filled shock absorbers are proven to withstand the impact of high-speed jumps. The tires with asymmetric tread patterns provide EAZYRC 1:18 Chevrolet Colorado with excellent grip, making it easy to run smoothly on almost any road.
What's in Box
1 x 1:18 Chevrolet Colorado RTR
1 x 2.4G Transmitter
1 x R4A Receiver(installed)
1 x 45A Brushless ESC(installed)
1 x 370 Brushless Motor (installed)
1 x 17g Digital Servo (installed)
1X 7.4V 1050mAh LIPO Battery
1 x USB Charger
1 x Hex Wrench Socket
1 x Product Manual
Need to Complete
4 x AA Batteries for Transmitter
Specification
Length | 310mm |
Width | 222mm |
Height | 140mm |
Wheelbase | 174mm |
Minimum Ground Clearance | 42mm |
Motor | 370 brushless motor |
Battery | 2S Lipo 7.4V 1050mAh |
Remote control distance | 80m |
Approx. operating duration time | 10mins |
Remote control | 2.4GHz |
ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS
Description
ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS
This 1:10 Atlas 4x4 is designed in the form of an off-road truck racer. The car body is moulded with PC plastic, which is light in weight and has a low center of gravity; the nylon roll cage at the back can protect the car shell during rollovers. The rigid metal frame and four-link suspension system ensure strong climbing ability. The chassis has proven reliability. In both dynamic and static aspects, the real vehicle has been painstakingly restored.
What's in Box:
- 1 x 1:10 1:10 Atlas 4x4 RS
- 1 x 2.4GHz Transmitter
- 1 x 2-in-1 Receiver / 40A ESC (installed)
- 1 x 550 Brushed Motor (installed)
- 1 x 9g Plastic Digital Servo (installed)
- 1 x 15kg Metal Digital Servo(installed)
- 1 x Product Manual
Need to Complete:
- 4 x AA Batteries for Transmitter
- Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)
Specification:
- Length: 537mm
- Width: 241mm
- Height: 247mm
- Wheelbase: 340mm
- Tire F/R: Φ 120mm
- Approach Angle: 63°
- Departure Angle:53°
- Ground Clearance: 79mm
- Motor: 35T 550 Brushed motor
- Driving speed: up to 15km/h
- Remote control distance: 80m
- Approx. operating duration time: 20mins
- Remote control: 2.4GHz Transmitter (Fibre Style) & Receiver Set
ROCHOBBY RC Rock Crawler RS Red 4WD
Description
1:10 Mashigan - BORN ADVENTURER
For adventurers, the road ahead is always rough and full of thorns, but whether there is a road or no road, this 1:10 Mashigan's 1.9 inch climbing tires can give you confidence, and meanwhile, the four-link suspension system gives you a guarantee of strong power, the metal trapezoidal beams provide you with a solid supportive structure. Even with a hard plastic car shell with a complete interior, Mashigan can easily overcome extreme road conditions. The real first-generation model uses leaf spring suspension, and adventurers will not ignore the history, the chassis can be installed with leaf spring suspension (sold separately) to restore the style of the first generation model. Pursuing the needs of climbing performance and restoration seems to be impossible, but through the compatible design of the chassis and the replacement of a few accessories, it can show a completely different shape. Two postures, and double the fun.
The exquisite interior and four-door full-opening design double the level of detail of this hard-shell RC model, which can be viewed statically or operated indoors. With climbing-level sturdy chassis and suspension system, FMS 1:10 Mashigan make it cool to go wild!
What's in the box:
1 x 1:10 Mashigan RS
1 x 2.4GHz Radio
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 550 Brushed Motor (installed)
1 x 9g Plastic Digital Servo (installed)
1 x 15kg Metal Digital Servo(installed)
1 x Product Manual
Need to Complete:
- 4 x AA Batteries for Radio
- Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)
Specification:
- Radio Control: 160 x 193 x 97mm, 221g (Battery not Included)
- Model Vehicle: 546 x 274 x 282mm, 4kg (Battery not Included)
- Tire: D:115mm, W:30mm
- Wheel Base: 339mm
- Ground Clearance: 82mm
- Approach Angle: 68°
- Departure Angle: 47°
- Driving Speed: up to 15km/h
- Remote Distance: 80m
- Play Time: 20 minute