VIP Adventurer
Charger With Adapter Wire
Description
SKU=FMSCHR001=APSC22121, Same Item
Applicable to 1500mm Moa, 1400mm SKY TRAINER 182, 1400mm J3, 1400mm Kingfisher, 1280mm Easy Trainer, 800mm Warbirds, 850mm Ranger, 800mm Easy Trainer, 800mm P51D, 800mm F4U V2, 800mm T28 V2, 800mm Zero V2, 1200mm Super EZ V4, 1220mm Ranger V1 & V2, 1500mm Maule, 64mm F-35 V2, 1400mm J-3, 1400mm Kingfisher, 1100mm A6M5 Zero, 1020mm F3A, 800mm Beaver, FSC18 Ford Bronco Brushed/Brushless, FCX10 PRO LC80, FCX10 LC80, 1:10 Toyota Land Cruiser FJ40, 1:10 Mashigan, 1:10 Colorado, 1:10 Canyon, 1:10 Atlas, FCX10 LC80 Brushless
Available for charging battery 1S 3.7V & 2S 7.4V & 3S 11.1V
FMS 2S LIPO BATTERY 7.4V 4400mAh 30C XT60 Plug
Description
For 1:6 Jimny, FCX10 LC80, FCX10 K5, FCX10 PRO LC80, 1:10 FJ40, 1:10 Mashigan, 1:10 Atlas, FCX10 Discovery/Range Rover/Defender 110, 1:10 Canyon, FCX10 LC80 Brushless
1:10 Toyota FJ40 LIGHT CUP
1:10 Toyota FJ40 MIRROR SET
1:10 Toyota FJ40 LENS SET
Upgrade Parts 1/6 & 1/10 Aluminum Steering C Hub for FMS RC Trucks (Mb Scaler, Jimny, Mashigan, FJ40, Atlas 4x4)
Description
Enhance the durability and precision of your steering system with these aluminum upgrade C hubs. Designed for select FMS RC models, these hubs provide extra strength compared to stock plastic parts, improving performance under tough off-road conditions.
Compatible Models:
FMS 1/6 1941 MB Scaler
FMS 1/6 Suzuki Jimny
FMS 1/10 Mashigan
FMS 1/10 Toyota Land Cruiser FJ40
FMS 1/10 Atlas 4x4
Note: This is an optional upgrade part, not a required replacement.
Common Parts - 1:6 FRONT OUTDRIVE SHAFT ASSEMBLY
Description
For 1:6 1941 Mb Scaler, 1:6 JIMNY, 1:10 Mashigan, 1:10 Toyota Land Cruiser FJ40, 1:10 Atlas 4x4 Parts
Common Parts - 1:6/1:10 MAIN GEAR BOX SET
Description
FMS RC Car Rack
Description
This Multi-layer display storage rack stand is designed to support a wide range of RC Car, including RC trucks and RC crawlers, with scales ranging from 1/6, 1/10, 1/12, 1/18, 1/24, to 1/32. Perfectly compatible with popular models like the fms FCX18, FCX24, FCX10 series, and more, it?¡¥s an ideal choice for showcasing your RC collection.
Whether you?¡¥re displaying your RC collection, performing maintenance, or storing them after cleaning, this RC car stand fits seamlessly into your living room, study, garage, workshop, or even an exhibition room. Designed to meet your needs across multiple scenarios, it?¡¥s the ideal addition to your RC hobby setup.
Enjoy hassle-free setup with a straightforward design that requires only four easy steps to assemble. No complicated tools are needed?ajust the included hex key. Plus, the detachable design makes storage and transportation incredibly convenient. Save time and effort so you can focus on enjoying your RC cars.
- Install the Adjustment Foot into the four interfaces of the base assembly.
- Align the Base Foot with the Connecting Pipe and secure the base structure with screws.
- The two pillars "L" and "R" are inserted into the two sides of the base and fixed
- Firmly attach the pillars to the base using the Connecting Pipe.
- Symmetrically install the two Fixed Clamps at the bottom of the pillars.
- Attach the Top Pipe to the top of the pillars.
-
Finally, install the Square Hook and place the adjustable Telescopic Pipe.
| Specification | |
|---|---|
| Length | 38cm/15inch |
| Width | 35mm/13.7inch |
| Height | 153mm/60.23inch |
| Gross Weight | 10kg/22pounds |
| Material |
|
| Assembly Time | 15min |
1:10 Luggage Bag (1 Bag Only) (Khaki/Yellow/Green)
Description
This product only includes 1 luggage bag.
1:10 Toyota FJ40 NAME PLATE AND LOGO SET
FMS 2S Lipo Battery 7.4V 3300mah 30C XT60 Plug
Description
For 1:6 Jimny, FCX10 LC80, FCX10 K5, FCX10 PRO LC80, 1:10 FJ40, 1:10 Mashigan, 1:10 Atlas, FCX10 Discovery/Range Rover/Defender 110, 1:10 Canyon, 1:10 F100
1:10 Toyota FJ40 SCREW SET
Description
FMS 5.8G Analog FPV Set
Description
FMS 5.8GHz Analog FPV System is a simple and user-friendly entry-level FPV setup.
What's in the box:
- 1 x 5.8GHz 4.3-inch FPV Monitor + Antenna
- 1 x 5.8GHz All-In-One Analog Camera
- 1 x Camera Housing With Mounting Base
- 1 x Monitor Mount
- 1 x 3.7V Battery (For Camera Use)
- 1 x 3.7V Battery Charger
- 1 x Hook-and-Loop Tape
- 1 x Adjustable Zip Ties
- 1 x Manual
How to Set Up:
1. Securely mount the camera on your RC vehicle (drone/car/boat) using the included hook-and-loop straps or zip ties.
2. Install the antenna before powering on the monitor, then use the auto-scan function to find the frequency.
3. Begin your FPV adventure!
Q&A:
1. Why doesn??£¤t the image look as clear as I expected?
Analog video transmission has lower resolution compared to HD systems, resulting in less sharpness. However, it offers low latency, making it great for close-range FPV (within 100 meters).
2. Why is the screen flickering and showing static (snow)?
This could be due to environmental interference. Try moving the screen further away from Wi-Fi routers or the transmitter. You can also switch the video transmission band or channel to see if that helps (check the manual for how to change the channel).
3. Why does the image look so blurry?
The camera??£¤s focus might not be properly adjusted. Try rotating the lens clockwise or counterclockwise until the image comes into sharp focus.
4. What is the operating endurance of the monitor and camera?
When fully charged, the monitor lasts up to 3 hours, while the camera provides up to 20 minutes of use.
5. What??£¤s the signal range of the 5.8GHz Analog FPV System?
The effective range is up to 150 meters in open areas without interference.
FPV Monitor Specification:
|
|
4.3 inches |
| Resolution | 480?¡§¡é272 pixels |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m2 |
| Input Format | NTSC/PAL Auto-Switch |
| AV Interface | 3.5mm analog video |
| Operating Voltage | 5V DC |
| Charging Port | Micro-USB 5V/2A |
| Battery Capacity | 3.7V 2500mAh Li-ion |
| Frequency Range | 4990-5945 MHz |
| Channels | 56 channels |
| Sensitivity | -90dBm |
| Antenna Connector | RP-SMA (inner pin) |
| Dimensions | 123?¡§¡é85?¡§¡é26 mm |
| OSD Display | Signal strength/Battery/CH |
| Auto-Scan | One-button frequency search |
Camera Specification:
|
|
Copper tube |
| Working Current | 220mA |
| Voltage Range | 2.5-5.5V (5V typ.) |
| Dimensions | 13.5?¡§¡é15.9?¡§¡é17.2mm |
| Weight | 3.6g |
| RF Power | 25mW |
| Channels | 48CH |
| Camera | 120?? FOV, 600TVL |
| Lens | f=1.4mm |
| Video Standard | PAL |
Common Parts - 1:6 LOCK SET
Description
For 1:6 1941 Mb Scaler, 1:6 JIMNY, 1:10 Mashigan, 1:10 Atlas 4x4, 1:10 Toyota Land Cruiser FJ40
Common Parts - 1:6/1:10 STEERING C HUB PARTS
Description
For 1:6 1941 Mb Scaler, 1:6 JIMNY, 1:10 Mashigan, 1:10 Atlas 4x4, 1:10 Toyota Land Cruiser FJ40
Upgrade Parts - 1:6/1:10 METAL TRANSMISSION SHAFT
Description
Common Parts - 1:6/1:10 TRANSMISSION SHAFT ASSEMBLY
Description
THRUST BAR MOUNT FOR 1:10 Toyota FJ40, ROCHOBBY 1:10 Atlas
Description
USED FOR 1:10 Toyota FJ40, ROCHOBBY 1:10 Atlas
1:10 FIRE EXTINGUISHER
1:10 Toyota FJ40 CAR BOBY ACCESSORY
Common Parts - 12mm WHEEL HEX SET
Description
For 1:6 1941 Mb Scaler, 1:6 JIMNY, 1:10 Mashigan, 1:10 Atlas 4x4, 1:10 Toyota Land Cruiser FJ40
1:10 Toyota FJ40 FRONT BUMPER SET
