VIP Adventurer
All RC Cars & Trucks
1 - 24 of 26 products
-
US onlyNew
-
-
-
-
-
-
-
US only Save $50.00
-
-
-
US only
EAZYRC 1:18 Chevrolet Colorado Off-Road Truck RTR Brushless Version In stock$149.99 USD$149.99 USD -
-
FMS 1:18 FCX18 LC80 Toyota Land Cruiser 80 Brushless RTR
Description
FMS 1:18 FCX18 LC80 Toyota Land Cruiser 80 Brushless RTR
Conquer Any Terrain with Unmatched Crawling and Off-Road Capabilities
Introduction
Authorized by Toyota, FMS has recreated the iconic Land Cruiser 80 with stunning details—from its sleek body to its realistic bumpers and snorkel.
The FCX18 features a 1212 outer-rotor brushless motor for smooth, precise control and quieter operation, delivering an exceptional driving experience. Its mid-mounted power assembly, combined with a 2-speed transmission and portal axles, increases ground clearance and enhances off-road capability.
With the option to switch to a limited-slip differential, the FCX18 balances high-speed stability and crawling power. Additional upgrades, such as metal components and brass wheel weights, further optimize performance.
What's in the box:
- 1 x 1:18 FCX18 LC80 Brushless RTR
- 1 x 2.4GHz 2A-BS Transmitter
- 1 x R4P1 Receiver BS (installed)
- 1 x 1212 Brushless Motor 3200KV (installed)
- 1X 7.4V 900mAh 2S LiPo Battery with 51005 2-Pin Male and XH2.54 3-Pin Male Connectors
- 1 x USB Charger
- 1 x Product Manual
Need to Complete:
- 4 x AAA Batteries for Transmitter
Specification:
| Length | 282mm |
| Width | 126mm |
| Height | 136mm |
| Wheelbase | 160mm |
| Tire F/R | D: 56mm, W: 19.2mm |
| Minimum Ground Clearance | 35mm |
| Approach Angle | 61° |
| Departure Angle | 35° |
| Motor | 1212 Brushless Motor 3200KV |
| Battery | 7.4V 900mAh 2S LiPo Battery with 51005 2-Pin Male and XH2.54 3-Pin Male Connectors |
| Remote Control Distance | 30m |
| Approx. Operating Duration Time | 45mins |
| Remote Control | MG44 + R4P1 Transmitter Receiver Set BS Version |
FMS 1:10 Ford F100 Monster Truck 2WD RTR / RS
Description
| Product Size | 476 x 335 x 240mm |
| Wheelbase | 294mm |
| Tire Size | D130 x W70mm |
| Ground Clearance | 45mm |
| Motor | 550 Brushed Motor |
| Steering Servo | 15kg x 1 |
| Drive System | 2WD |
| Remote Control | FS-FMS-G4P1-BS |
| Receiver | FS-FMS-R4D-ESC-BS(40A) |
| Remote Control Distance | 150m |
| Recommended Battery | 2S Lipo Battery 7.4V 3000mah 30C with XT60 Connector |
| Battery Compartment | 152 x 49.5 x 30mm |
FMS 1:24 FCX24M Land Rover Camel Trophy Edition RTR
Description
| Model | Discovery | Range Rover | Defender 110 | Defender 90 |
| Length | 232mm | 227mm | 240mm | 214mm |
| Width | 105mm | 103mm | 107mm | 107mm |
| Height | 133mm | 120mm | 128mm | 128mm |
| Wheelbase | 134mm | 134mm | 135mm | 111mm |
| Tire F/R | Φ 48*17mm | Φ 48*17mm | Φ 50*20mm | Φ 50*20mm |
| Approach Angle | 52° | 64° | 55° | 55° |
| Departure Angle | 55° | 47° | 49° | 51° |
| Minimum Ground Clearance |
28mm | 28mm | 29mm | 24mm |
| Motor | 050 Motor Set | |||
| Battery | 7.4v 380mAh | |||
FMS 1:18 FCX18 LC80 Toyota Land Cruiser 80 V2 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:18 FCX18 Chevrolet K10 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:10 Toyota Land Cruiser FJ40 RS
Description
| Length | 571mm |
| Width | 268mm |
| Height | 326mm |
| Wheelbase | 339mm |
| Tire F/R | Φ 115mm |
| Approach Angle | 65° |
| Departure Angle | 40° |
| Ground Clearance | 82mm |
| Motor | 35T 550 Brushed motor |
| Remote control distance | 80m |
| Remote control | 2.4GHz Transmitter (Fibre Style) & Receiver Set |
FMS 1:24 FSC24 Chaser Short Course Truck RTR
Description
FSC24 Chaser - 1:24 Short Course Truck
The Perfect Short Course Truck for Beginners to Master Speed and Control.
Background
The Baja 1000, which began in 1967, is one of the most challenging and thrilling off-road events in the world. Short-course trucks, often referred to as light trucks, are typically designed for urban use and short-distance transport, prioritizing efficiency and agility. However, in events like the Dakar Rally, these trucks undergo extensive modifications, including upgrades to their suspension, chassis, specialized tires, and cockpit safety features. These enhancements equip the trucks to navigate harsh terrains such as desert dunes, rocky landscapes, river crossings, and mountains, enabling them to perform exceptionally well under extreme conditions.
Introduction
The FSC24 Chaser is available in two striking paint schemes, featuring a plastic shell crafted using a blister process and adorned with eye-catching stickers that stand out on any terrain.
FMS has developed a new-generation FSC24 chassis, equipped with front independent suspension and a rear straight axle. The frame is constructed from high-strength nylon, providing an ideal balance of lightness and durability. The mid-mounted power unit, with its low center of gravity, incorporates a two-speed transmission and a 370 high-speed brushed motor into a single compact unit. The two-speed transmission is controlled via CH3 on the remote, while metal planetary gear differentials at both axles ensure robust torque delivery for high-speed off-roading, exceptional cornering, and a realistic stance.
What's in the box:
- 1 x 1:24 FSC24 Chaser RTR
- 1 x 2.4GHz G3 V3 Transmitter
- 1 x R3B Receiver with ESC Group Control Board (installed)
- 1 x 370 Brushed Motor (installed)
- 2 x 13g Metal Servo (installed)
- 1 x 2S Lipo 7.4V 900mAh 25C with XT30 Connector
- 1 x USB Charger
- 1 x Product Manual
Need to Complete:
- 4 x AAA Batteries for Transmitter
Specification:
| Length | 236mm |
| Width | 143mm |
| Height | 107mm |
| Wheelbase | 140mm |
| Tire F/R | D: 54mm, W: 23mm |
| Minimum Ground Clearance | 33mm |
| Approach Angle | 63° |
| Departure Angle | 53° |
| Motor | 370 Brushed Motor |
| Servo | 13g Metal Servo x 2 |
| Battery | 2S Lipo 7.4V 900mAh 25C with XT30 Connector |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 30mins |
| Remote Control | G3 V3+ Transmitter, R3B Receiver with ESC Group Control Board |
ROCHOBBY 1:7 Ridge Racer U4 Desert Buggy RS
Description
Ridge Racer U4 - 1:7 Scale Offroad Desert Buggy
In the vast expanse of the desert, every inch of terrain is your battleground, every sprint is a challenge to your limits. Get ready to embark on a new adventure! Introducing the Ridge Racer U4 - 1:7 Scale Brushless Offroad Desert Buggy, your ultimate tool for desert exploration!
The Ridge Racer U4 is our first 1:7 scale model, offering a large size that brings a whole new desert adventure experience. Whether tackling desert hills or conquering sand dunes, this buggy will be your perfect companion.
Different from before, the Ridge Racer U4 features the latest brushless technology, providing you with unparalleled power and speed. Feel the rush as gravel splashes under the wheels!
What's in the box:
- 1 x 1:7 Ridge Racer U4 RS
- 1 x 2.4G Transmitter + Receiver (installed)
- 1 x Brushless Motor 4274 1600KV (installed)
- 1 x Brushless 150A ESC (installed)
- 1 x Bronco Logo sticker
- 1 x Product Manual
Need to Complete:
- 4 x AA Batteries for Transmitter
- Battery & Charger for Kit (Recommended 3S Lipo 11.1V 7200mAh 60C With EC5 Connector x2)
- 6S Battery: For speed lovers, pair 1:7 Ridge Racer U4 with 6S battery for high-speed thrills up to 50 mph.
- 4S Battery: For superior control, choose a 4S battery for your RC car's precision handling.
Notes To Buyer:
- This product consists of precision components and is not a toy. It is not suitable for individuals under the age of 14.
- This product can reach speeds up to 80 km/h. Please use it only in open and unoccupied areas.
Specification:
| Length | 640mm |
| Width | 379mm |
| Height | 275mm |
| Wheelbase | 425mm |
| Tire F/R | Φ 145*56mm |
| Weight | 5.9KG |
| ESC | 150A |
| Motor | 4274 1600KV |
| Battery Box Size | 181*47.5MM |
| Drivetrain | 4WD |
| Speed | Up to 80km/h |
| Radio Control | 2.4GHz 5-Channel Remote with 3-Axis Gyroscope |
| Suspension | Independent Front Suspension With A Solid-Axle |
| Gear ratio | 11T Pinion Gear11T : 1:14.55 12T Pinion Gear12T :1:13.34 13T Pinion Gear13T : 1:12.31 |
ROCHOBBY 1:10 Mashigan RC Rock Crawler RS Red 4WD
Description
1:10 Mashigan - BORN ADVENTURER
For adventurers, the road ahead is always rough and full of thorns, but whether there is a road or no road, this 1:10 Mashigan's 1.9 inch climbing tires can give you confidence, and meanwhile, the four-link suspension system gives you a guarantee of strong power, the metal trapezoidal beams provide you with a solid supportive structure. Even with a hard plastic car shell with a complete interior, Mashigan can easily overcome extreme road conditions. The real first-generation model uses leaf spring suspension, and adventurers will not ignore the history, the chassis can be installed with leaf spring suspension (sold separately) to restore the style of the first generation model. Pursuing the needs of climbing performance and restoration seems to be impossible, but through the compatible design of the chassis and the replacement of a few accessories, it can show a completely different shape. Two postures, and double the fun.
The exquisite interior and four-door full-opening design double the level of detail of this hard-shell RC model, which can be viewed statically or operated indoors. With climbing-level sturdy chassis and suspension system, FMS 1:10 Mashigan make it cool to go wild!
What's in the box:
1 x 1:10 Mashigan RS
1 x 2.4GHz Radio
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 550 Brushed Motor (installed)
1 x 9g Plastic Digital Servo (installed)
1 x 15kg Metal Digital Servo(installed)
1 x Product Manual
Need to Complete:
- 4 x AA Batteries for Radio
- Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)
Specification:
- Radio Control: 160 x 193 x 97mm, 221g (Battery not Included)
- Model Vehicle: 546 x 274 x 282mm, 4kg (Battery not Included)
- Tire: D:115mm, W:30mm
- Wheel Base: 339mm
- Ground Clearance: 82mm
- Approach Angle: 68°
- Departure Angle: 47°
- Driving Speed: up to 15km/h
- Remote Distance: 80m
- Play Time: 20 minute
FMS 1:18 FCX18 Hummer EV Pickup Truck RTR
Description
| Length | 328mm |
| Width | 138mm |
| Height | 133mm |
| Wheelbase | 199mm |
| Tire F/R | Φ 66*22mm |
| Minimum Ground Clearance | 40mm |
| Approach Angle | 51° |
| Departure Angle | 41° |
| Motor | 180 Brushed motor |
| Battery | 2S LiPo 7.4V 900mAh x1 |
| Remote control distance | 30m |
| Approx. operating duration time | 45mins |
| Remote control | MG41-BS transmitter，R4A3 receiver with ESC group control board |
FMS 1:12 2006 Hummer H1 Alpha RTR
Description
The "Steel Chariot" of a Passionate and Tough Warrior
The FMS HUMMER H1 is coming strong! Unlike the common scale crawlers on the market, FMS HUMMER H1 is a very high-detail RC crawler that comes complete with a full scale chassis structure and drivetrain system, and an exquisite scale interior with full door function.
Power comes from a 370 motor. Two servos respectively control both the switch between high and low speed gears and the operation of the transfer case, thus switching between rear drive and four-wheel drive. Both the front and rear differentials also have a differential lock function, each driven by a servo which can be locked by remote control. Four metal drive shafts transmit power from the differential to the reduction gear assembly, commonly known as a "portal axle". The HUMMER H1 also has a full metal gear-set and 47 ball-bearings. We have included the rear wheel steering as an additional hidden function, so you now have a total of 4 steering modes! The extra mode, which can reduce the steering radius by 50%, is ideal in confined spaces.
The HUMMER H1 uses a front mid-engine layout just like the real vehicle, and the hood is designed to be flipped forward. Four doors can all be opened, and the smart door lock mechanism is a separate unit. The cabin also features a highly detailed dashboard and moving steering wheel that turns with the main steering. The roof is removable and the windshield can be lowered forward. The body of the Hummer is mainly made of aluminum alloy and fiberglass, and the fixing method is riveting. A 2.4G 7CH digital proportional radio system, a receiver/ ESC/ light control three-in-one unit, 7 servos（including 13g metal gear servo x 2pcs)
The FMS HUMMER H1 is presented as it should be – a no compromise “work of art” scale vehicle that is sure to be one for collectors and enthusiasts alike!
What's in Box
1 x 1:12 HUMMER H1 RS
1 x 2.4GHz Transmitter
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 370 Brushed Motor (installed)
5 x 9g Plastic Digital Servo (installed)
2 x 13g Metal Digital Servo(installed)
1 x Hex Wrench Socket
1 x Product Manual
Need to Complete
4 x AAA Batteries for Transmitter
Battery for Kit (Recommended 2S 7.4V 2000mAh 20C XT30 plug; Battery compartment size: L 90mm x W 35mm x H 20mm)
Specification
Length: 408mm
Width: 222mm
Height: 162mm
Wheelbase: 272mm
Tire F/R: Φ 78 × 25mm
Approach Angle: 52°
Departure Angle: 39°
Speed: the highest fast gear is 8km/h, the highest slow gear is 5km/h
Minimum Ground Clearance: 40mm
Motor: 370 Brushed motor
Remote control distance: 30m
Approx. operating duration time: 20mins
Remote control: G7 + R7A Transmitter receiver set
FMS 1:24 FMT24 Chevrolet Colorado Monster Truck RTR
Description
| Length | 239mm |
| Width | 161mm |
| Height | 108mm |
| Wheelbase | 140mm |
| Tire F/R | D: 64.8mm, W: 33.4mm |
| Minimum Ground Clearance | 37mm |
| Approach Angle | 66° |
| Departure Angle | 53 ° |
| Motor | 370 brushed motor |
| Servo | 13g metal servo x 1, 9g servo x 1 |
| Battery | 2S Lipo 7.4V 900mAh 25C |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 20mins |
| Remote Control | G3 V3+ R3B transmitter, receiver with ESC group control board |
FMS 1:12 Land Rover Series II RTR
Description
Adventurer's Staple, Off-Road Legends - 1:12 Land Rover
The Land Rover Series 2 is an iconic off-road vehicle that well represents the adventurous spirit of the Land Rover brand. It combines outstanding durability with outstanding versatility, making it the ideal companion for outdoor enthusiasts and adventure seekers.
The new Land Rover Series II launched by FMS inherits the essence of real cars in terms of highly realistic appearance, comfortable fully simulated interior, durable chassis and powerful power system.
Whether traversing rugged mountains, traversing muddy trails, or crossing rivers, FMS-Land Rover Series 2 can bring an exciting and reliable handling experience, embodying the spirit of pioneering adventure, allowing players to create unforgettable memories.
What's in the box:
- 1 x 1:12 Land Rover Series II RTR
- 1 x 2.4G Transmitter + 2 in1 ESC & Receiver (installed)
- 1 x 180 Brushed Motor (installed)
- 3 x 3Y 9g Digital Servo (installed)
- 1 x 2S Lipo 7.4V 380mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
- 1 x Bind Connector
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 270mm
- Width: 135mm
- Height: 149mm
- Wheelbase: 169mm
- Tire F/R : Φ 54.8*19.5mm
- Minimum Ground Clearance: 31mm
- Approach Angle: 57°
- Departure Angle: 42 °
- Motor: 180 Brushed motor
- Battery: 2S Lipo 7.4V 380mAh x1
- Remote control distance: 30m
- Approx. operating duration time: 20mins
- Remote control: MG41-BS transmitter, R4A1 receiver with ESC group control board
FMS 1:10 FCX10 LC80 Toyota Land Cruiser 80 RS
Description
| Length | 572mm |
| Width | 251mm |
| Height | 288mm |
| Wheelbase | 325mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 51° |
| Departure Angle | 42° |
| Ground Clearance | 76mm |
| Motor | 550 32T Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 6CH Remote Control System |
| Recommended Battery | 2S or 3S 5000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 40mm |
FMS 1:10 FCX10 Chevrolet K5 Blazer RS
Description
| Length | 548mm |
| Width | 249mm |
| Height | 285mm |
| Wheelbase | 324mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 58° |
| Departure Angle | 48° |
| Ground Clearance | 89mm |
| Motor | 550 Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 11CH Remote Control System |
| Recommended Battery | 2S Lipo 7.4V 2000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 30mm |
FMS 1:24 FCX24 Power Wagon RTR
Description
The World's First 1/24 Climbing Rock Crawler with Two-speed Transmission - Power Wagon FCX24
FCX24 meticulously designed by FMS team will redefine the small scale climbing rc car. As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. It is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.
What's in Box:
- 1 x 1:24 Power Wagon RTR
- 1 x G3 V1 Transmitter
- 1 x R3A V1 Receiver (installed)
- 1 x 130 Brushed Motor (installed)
- 1 x 7.4V 380mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
- 4 x AAA Batteries for Transmitter
FMS 1:24 FCX24 Mercedes-Benz Unimog 421 RTR
Description
| Length | 249mm |
| Width | 153mm |
| Height | 160mm |
| Wheelbase | 142mm |
| Tire F/R | Φ 20mm |
| Approach Angle | 49° |
| Departure Angle | 69° |
| Ground Clearance | 40mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
EAZYRC 1:18 Chevrolet Colorado Off-Road Truck RTR Brushless Version
Description
Overview
If you're looking for your first 1:18 RC monster truck, look no further than the EAZYRC 1:18 Chevrolet Colorado, licensed by General Motors LLC. 17g digital servo, 45A brushless ESC, 2S Li-Po battery, and a 4-pole high-torque brushless motor provide sufficient power for the full-time four-wheel drive system. The top speed reaches 45 km/h.
The chassis uses a honeycomb structure with metal reinforcements to increase the overall strength, and the durability is superior to that of similar products. The all-metal gears and metal differentials plus durable steel drive shafts, provide reliable heavy-duty transmission and can withstand extreme high-speed impacts. The whole vehicle adopts a modular chassis design so that the power system, electronic equipment, and differential components are easy to disassemble and the daily vehicle maintenance is simple. The all-metal oil-filled shock absorbers are proven to withstand the impact of high-speed jumps. The tires with asymmetric tread patterns provide EAZYRC 1:18 Chevrolet Colorado with excellent grip, making it easy to run smoothly on almost any road.
What's in Box
1 x 1:18 Chevrolet Colorado RTR
1 x 2.4G Transmitter
1 x R4A Receiver(installed)
1 x 45A Brushless ESC(installed)
1 x 370 Brushless Motor (installed)
1 x 17g Digital Servo (installed)
1X 7.4V 1050mAh LIPO Battery
1 x USB Charger
1 x Hex Wrench Socket
1 x Product Manual
Need to Complete
4 x AA Batteries for Transmitter
Specification
| Length | 310mm |
| Width | 222mm |
| Height | 140mm |
| Wheelbase | 174mm |
| Minimum Ground Clearance | 42mm |
| Motor | 370 brushless motor |
| Battery | 2S Lipo 7.4V 1050mAh |
| Remote control distance | 80m |
| Approx. operating duration time | 10mins |
| Remote control | 2.4GHz |
FMS 1:24 FCX24 Lemur RTR
Description
| Length | 209mm |
| Width | 128mm |
| Height | 120mm |
| Wheelbase | 136mm |
| Tire | D: 66mm, W:22mm |
| Minimum Ground Clearance | 41mm |
| Reduction ratio | (High Gears ) 24.75/(Low Gears ) 99 |
| Motor | 130 Brushed motor |
| Battery | 2S Lipo 7.4V 380mAh x1 |
| Remote control distance | 80m |
| Approx. operating duration time | 20mins |
| Remote control | G3+ R3A transmitter, receiver with ESC group control board |
| Key functions | Two Speed Transmission/Portal Axle |
FMS 1:12 TOYOTA FJ45 Pickup Truck RTR
Description
1:12 TOYOTA FJ45 Pickup Truck
To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.
The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.
The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.
What's in the box:
- 1 x 1:12 TOYOTA FJ45 RTR
- 1 x 2.4G Transmitter
- 1 x 2-in-1 Receiver (installed)
- 1 x 180 Brushed Motor (installed)
- 1 x 9g Plastic Digital Servo (installed)
- 1 x 2S 7.4V 380mAh Battery with PCM
- 1 x USB Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 345mm
- Width: 127mm
- Height: 124mm
- Wheel base: 270mm
- Tire: D:60mm , W:15mm
- Ground clearance: 29mm
- Approach angle: 58°
- Departure angle: 29.9°
- The Highest Driving speed: 8km/h
- Remote control distance: 30m
- Play time: 20 minute
FMS 1:6 JIMNY RS Brown
Description
SUZUKI Jimny LJ10 1/6 - FMS's Another Great SUZUKI Vehicle with Fantastic Details
- "Jimny, a legendary car, which successfully filled the market gap with its small displacement, small size, low price and unique market position, was born to break the traditional views on off-road vehicles and demonstrated itself as a reliable tool for off-road enthusiasts.
- The predecessor of the Jimny was the Hope Star ON 4WD of Hope Motors, which was sold to Suzuki Motor in 1968. 1970 saw the introduction of the LJ10 weighing 600kg with a 359cc two-stroke inline twin-cylinder equipped.
- FMS is proud to present this 1/6 scale officially licensed Jimny LJ10. It boldly adopts a metal beam, non-load bearing chassis, front and rear leaf spring suspension and universal joints. The soft-rubber-wrapped seats feature a cushion like softness and can be collapsed, making them a perfect match for 1/6 figures.
- Power switch and maintenance is more convenient as motor, ESC, receiver and battery are all delicately integrated under the hood. Just open the hinged hood for full access.
- Marvelous interior detailing is on full display, from the adjustable windshield and safety bars at the door positions on both sides, the real-lenses mirrors, to the linked steering wheel; from the miniature shadow instrument panel, mechanical buttons, to the manual gearshift, foot pedal set and so on.
- Different scale styling can be achieved with the large rear bucket space, perfect for various simulated parts when the tailgate is lowered and the spare tire carrier is opened to the right.
- The black adjustable anti-roll bar provides convenient methods for the upgrade of parts in various materials and styles. In terms of lighting, the headlights are always on by default, while the front and rear turn signals and taillights are reserved for light bead positions, which is convenient for upgrading the lighting system."
- Most of the early Japanese off-road vehicles were small in size. In order to save space, the spare tire was suspended outside the vehicle. As an important simulation structure of Jimny, the spare tire bracket of the model car can be rotated separately, and the spare tire can also be taken off. But please pay special attention, the spare tire protrudes out of the rear bumper, and the collision from the rear of the car may easily cause damage to the spare tire bracket and tailgate. When running on a site with a risk of collision, it is recommended to take off the spare tire to avoid damage to the vehicle.
Specification
- Radio Control: 160 x 193 x 97mm
- Model Vehicle: 545.9 x 232.9 x 265.3mm
- Tire: D:115mm , W:30mm
- Wheel Base : 330mm
- Ground Clearance: 50mm
- Approach Angle: 41.2°
- Departure Angle: 48.4°
Weight
- Radio control: 221g (Battery not Included)
- Model Vehicle: 18kg(Battery not Included)
What's in the box
- Radio Control: AA X4
- Transmitter x1
- Manual x1
- 3Y 9g Digital Servo x1
- 3Y 15kg Mental Digital Servo x1
- 550Brushed Motor x1
- 40A Waterproof ESCx1
Need to Complete
- AA Batteries for Radio
- Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)
