VIP Adventurer
RC Airplane Accessories
Use the filter menu to find your desired model!
1 - 24 of 1650 products
-
-
-
-
-
-
🎁 Floats On 1220mm Ranger V2 Float Kit$0.00 USD$0.00 USD -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Propeller 10*5
Description
For 1220mm Ranger V1 & V2 and 1220mm Super EZ V4.
Propeller 11*7
Description
For 1400mm J3 V4, 1400mm Kingfisher, 1300mm PA-18, 1500mm Maule.
1220mm Ranger Spinner
Description
Suitable for 1220mm Ranger V1 & V2
Battery 11.1V 2200mAh 25C XT60 Plug
Description
Suitable for 1300mm PA-18, 1220mm Ranger V1 & V2, 1500mm Maule, 64mm F-35 V2, 1400mm J-3, 1400mm Kingfisher, 1100mm A6M5 Zero, 1020mm F3A
This battery is compatible with the Charger, SKU: FMSCHR001
🎁 Floats On 1220mm Ranger V2 Float Kit
Description
This product is used for the app BOGOS: Free gift & Buy X Get Y to work.
Please do not delete/edit it while the offers are still running!
If you need assistance, please contact us via Livechat in-app or email us at:
support@secomapp.com
.
Battery 11.1V 1300mAh 25C XT60 Plug
Description
Suitable for 1220mm Ranger V1 & V2, 1200mm Super EZ, 2300mm FOX
This battery is compatible with the Charger, SKU: FMSCHR001
1300mm PA-18 Spinner
Description
1220mm Ranger Wing Strut Set
Description
RC-Aircraft Lipo Battery Voltage Checker
Description
Accurate electronic digital screen.
Simple Connecting. Just plug the balance connector into the battery balance charging port to start operation.
Propeller 12*7.5
Description
For 1700mm PA-18, 1800mm Ranger, 1700mm PA-18 V2
1220mm Ranger V2 Cowl (Red/Green/Yellow)
Description
The 1220mm Ranger Yellow V1 and V2 are using the same cowl (SKU=FMSRN105)
1500mm Cessna 182 (3-Blade) Propeller 11x6
Description
Common Propeller 7.5*4
Description
PROPELLER 14*8 For 1400mm F4U V3, 1500mm P47
Description
For 1400mm F4U V3, 1500mm P47
RC Airplane Transmitter & Receiver Set (6 channel)
Description
For 1220mm Ranger, 1300mm PA-18, 1280mm Easy Trainer, 800mm F4U, 1220mm Super EZ, 800mm P‑51D, 1020mm F3A, 1400mm J-3, 1400mm Kingfisher, 64mm F-18 V2, 64mm F-35 V2, 64mm F-15 V2, 800mm F4U V2, 800mm Zero V2, 800mm T-28, 750mm Edge 540, 1020mm F3A, 1400mm F3A, 1400mm Pitts V2, 1500mm Moa, 800mm Easy Trainer, 1500mm Maule, 1700mm PA-18, 64mm Rafale, 3000mm Fox, 2300mm FOX, 1500mm Cessna, 2500mm ASW-17, 64mm Futura, 1800mm Ranger, 64mm F-16, 64mm J-10
1300mm PA-18 Supporting Bar Set
Description
SyncPilot Headtracker Set
Description
Meet SyncPilot – the slick head tracking system built by FMS and XF Robot for mid-to-close-range FPV action. It runs on its own dedicated 2.4G connection (no messy signal forwarding required), so you get plug-and-play simplicity for your FPV gear.
The system delivers universal compatibility with virtually all RC platforms - from multirotors and fixed-wing aircraft to surface vehicles. Under optimal conditions, it can achieve 1km ground operational range and 4km airborne range, making it the ideal solution for most mid-to-close-range FPV scenarios. Install the SyncPilot on your model and dive into head-tracking technology!
What's in the box:
- 1 x Headtracking Module
- 1 x Headtracking Transmitter
- 1 x SyncPilot Headtracking Receiver
- 1 x 5V Power Cable
- 1 x 3M Dual Lock™
- 1 x Product Manual
Q&A:
1. What is a Headtracker?
A Headtracker is a motion-based control system that translates head movements into real-time control signals. When mounted on FPV goggles, it wirelessly transmits these signals to the gimbal, which adjusts the camera's orientation, delivering a seamless and immersive FPV experience with responsive, real-time control.
2. What other equipment is needed to use the SyncPilot Headtracker Set?
You’ll need a gimbal, camera, video transmission system, and compatible FPV goggles for mounting the SyncPilot Headtracker Set.
3. Are there any other accessories available to complement the SyncPilot Headtracker?
Yes! We offer several accessories to enhance your FPV experience, including the VTX Mount & Cooling Fan, FPV Servo Gimbal, and FPV Cockpits for the FMS RC Airplanes, including the 1100mm PC-21 and 80mm BAE Hawk.
4. What if the gimbal moves in the opposite direction of my head?
Make sure the head tracking module is installed correctly. You can also use the head tracker software to adjust the direction and gain settings to match your preferred setup.
5. How is the head tracking module powered?
The head tracking module runs on an independent battery that is charged via a Type-C port for up to 1 hour and 15 minutes of use.
6. How is the head tracking receiver powered?
The head tracking receiver requires 5V power, which can be supplied through a direct connection to UBEC, the RC receiver, or the flight controller for quick and easy setup.
Specification:
|
|
45*28.2*4.2mm |
| Receiver Size | 38*22*15mm |
| Transmitter Size | 40*21*11.5mm |
| Gross Weight | 80g |
| Package Size | 135*90*55mm |
| Assembly Time | 5min |
| Headtracker Module Battery | 3.7V 300mAh |
| Operating Time on Full Charge | 1.25h |
| Operating Frequency | 2.4Ghz |
| Singal Range (Optimal Condition) | Surface 1km; Airborne 4km |
| Antenna | IPEX Omnidirectional T-type Antenna | Max. Gain 3dBi |
| Casing Material | ABS Plastic |
Product:
|
|
Price | Note |
| SyncPilot Headtracker Set | $99.99 | Includes transmitter & receiver |
| SyncPilot Headtracker Receiver | $39.99 | Includes receiver only |
| FPV Servo Gimbal (2-Axis) | $22.99 |
1. 3D Printed with ABS |
| VTX Mount & Cooling fan (O4 Pro) | $4.99 |
1. 3D Printed with TPU |
| VTX Mount & Cooling fan (O3) | $4.99 | 1. 3D Printed with TPU 2. Used with DJI O3 |
| VTX Mount & Cooling fan (Avatar) | $4.99 | 1. 3D Printed with TPU 2. Used with Caddx Avatar |
| 1100mm PC-21 FPV Cockpit | $26.99 | Used with FMS 1100mm PC-21 RC Airplane |
| 80mm BAE Hawk FPV Cockpit | $28.99 | Used with FMS 80mm BAE Hawk RC Airplane |
PROPELLER 13*9
Description
For 1400mm T-28 Red & Yellow.
1220mm Ranger Wing Support Base Plastic Parts
Description
Suitable for 1220mm Ranger V1 & V2
1300mm PA-18 Cowl
Description
90mm Avanti Rear Fuselage with Vector Tail Nozzle
