FMS 1:18 FSC18 Ford Bronco RTR EB Brushed/Brushless
Charger With Adapter Wire
Description
SKU=FMSCHR001=APSC22121, Same Item
Applicable to 1500mm Moa, 1400mm SKY TRAINER 182, 1400mm J3, 1400mm Kingfisher, 1280mm Easy Trainer, 800mm Warbirds, 850mm Ranger, 800mm Easy Trainer, 800mm P51D, 800mm F4U V2, 800mm T28 V2, 800mm Zero V2, 1200mm Super EZ V4, 1220mm Ranger V1 & V2, 1500mm Maule, 64mm F-35 V2, 1400mm J-3, 1400mm Kingfisher, 1100mm A6M5 Zero, 1020mm F3A, 800mm Beaver, FSC18 Ford Bronco Brushed/Brushless, FCX10 PRO LC80, FCX10 LC80, 1:10 Toyota Land Cruiser FJ40, 1:10 Mashigan, 1:10 Colorado, 1:10 Canyon, 1:10 Atlas, FCX10 LC80 Brushless
Available for charging battery 1S 3.7V & 2S 7.4V & 3S 11.1V
FMS 5.8G Analog FPV Set
Description
FMS 5.8GHz Analog FPV System is a simple and user-friendly entry-level FPV setup.
What's in the box:
- 1 x 5.8GHz 4.3-inch FPV Monitor + Antenna
- 1 x 5.8GHz All-In-One Analog Camera
- 1 x Camera Housing With Mounting Base
- 1 x Monitor Mount
- 1 x 3.7V Battery (For Camera Use)
- 1 x 3.7V Battery Charger
- 1 x Hook-and-Loop Tape
- 1 x Adjustable Zip Ties
- 1 x Manual
How to Set Up:
1. Securely mount the camera on your RC vehicle (drone/car/boat) using the included hook-and-loop straps or zip ties.
2. Install the antenna before powering on the monitor, then use the auto-scan function to find the frequency.
3. Begin your FPV adventure!
Q&A:
1. Why doesn??£¤t the image look as clear as I expected?
Analog video transmission has lower resolution compared to HD systems, resulting in less sharpness. However, it offers low latency, making it great for close-range FPV (within 100 meters).
2. Why is the screen flickering and showing static (snow)?
This could be due to environmental interference. Try moving the screen further away from Wi-Fi routers or the transmitter. You can also switch the video transmission band or channel to see if that helps (check the manual for how to change the channel).
3. Why does the image look so blurry?
The camera??£¤s focus might not be properly adjusted. Try rotating the lens clockwise or counterclockwise until the image comes into sharp focus.
4. What is the operating endurance of the monitor and camera?
When fully charged, the monitor lasts up to 3 hours, while the camera provides up to 20 minutes of use.
5. What??£¤s the signal range of the 5.8GHz Analog FPV System?
The effective range is up to 150 meters in open areas without interference.
FPV Monitor Specification:
|
|
4.3 inches |
| Resolution | 480?¡§¡é272 pixels |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m2 |
| Input Format | NTSC/PAL Auto-Switch |
| AV Interface | 3.5mm analog video |
| Operating Voltage | 5V DC |
| Charging Port | Micro-USB 5V/2A |
| Battery Capacity | 3.7V 2500mAh Li-ion |
| Frequency Range | 4990-5945 MHz |
| Channels | 56 channels |
| Sensitivity | -90dBm |
| Antenna Connector | RP-SMA (inner pin) |
| Dimensions | 123?¡§¡é85?¡§¡é26 mm |
| OSD Display | Signal strength/Battery/CH |
| Auto-Scan | One-button frequency search |
Camera Specification:
|
|
Copper tube |
| Working Current | 220mA |
| Voltage Range | 2.5-5.5V (5V typ.) |
| Dimensions | 13.5?¡§¡é15.9?¡§¡é17.2mm |
| Weight | 3.6g |
| RF Power | 25mW |
| Channels | 48CH |
| Camera | 120?? FOV, 600TVL |
| Lens | f=1.4mm |
| Video Standard | PAL |

FSC18 Ford Bronco Tires Set(Red,2 Pairs)
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FSC18 Ford Bronco Tires Set(Green,2 Pairs)
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FSC18 Ford Bronco Hub Set
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FSC18 Ford Bronco LED Wiring Set(Brushless)
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco Center Driveshaft Steel Parts(Brushless)
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco Suspension Arm Set
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FSC18 Ford Bronco Car Body Set(25 Brushless)
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco Car Body Set(24 Brushless)
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco Shock Set(Brushless Version)
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco Wheel Axle/Differential Outdrive(Brushless Version)
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco CVD Driveshaft(Brushless Version)
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco Assembled Differential(Brushed Version)
Description
Used For FSC18 Ford Bronco Brushed
FSC18 Ford Bronco Suspension Arm Link Set
FSC18 Ford Bronco Dogbone(Brushed)
Description
Used For FSC18 Ford Bronco Brushed
FSC18 Ford Bronco Offroad LED Set
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FSC18 Ford Bronco 2.2KG Servo
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FSC18 Ford Bronco Pinion Gear 13T
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FSC18 Ford Bronco Steering Set
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FMS Lipo Battery 7.4V 2000mAH 20C XT60
Description
Used For FSC18 Ford Bronco Brushed/Brushless
FSC18 Ford Bronco Transmitter&Receiver(Brushless Version)
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco Brushless Motor
Description
Used For FSC18 Ford Bronco Brushless
FSC18 Ford Bronco Assembled Differential(Brushless Version)
Description
Used For FSC18 Ford Bronco Brushless