VIP Adventurer
Sale
Use the filter menu to find your desired model!
1 - 24 of 97 products
-
Canada OnlyBest seller
-
-
-
-
-
-
-
-
-
US only Save $50.00
-
-
-
-
-
EAZYRC 1:18 Chevrolet Colorado Off-Road Truck RTR Brushless Version In stock$149.99 USD$149.99 USD -
-
-
-
FMS 1220mm Ranger EP V2 With Reflex V3 RTF / PNP
Description
The Perfect RC Airplane For Beginners
As the newest member of the FMS multi-purpose aircraft lineup, the 1220mm Ranger V2 retains all of the fantastic features that pilots have come to expect from FMS stable flight characteristics, ease of assembly, and realistic general-aviation inspired design.
Built with ultralight EPO foam, the large high-winged airframe configuration gives the Ranger stable flight characteristics and low wing-loading with extraordinary amounts of lift, even at slow speeds. Robust plastic struts give extra strength to the wings during aerobatic maneuvers and the patented high-strength “crash-proof” spring cushioned nose landing gear makes ground handling a breeze.
A great aircraft is nothing without a great, dependable power system. FMS has equipped the ranger with a 3136/1200KV outrunner motor with 20A Predator ESC, which allows the ranger to climb almost vertically on demand!
Featuring red, yellow, or green color schemes, the ranger can always be easily orientated even in overcast weather. Designed specifically for beginner pilots, the ranger boasts effortless assembly. Requiring only several screws and twist-locks to complete assembly, the longest wait time is the time it takes to charge the battery! Additionally, the two-piece design of the fuselage and main wing reduces packaging size by thirty percent, facilitating easy transport and storage!
Reflex V3, an onboard flight stabilization system, is factory installed. The Reflex system features Stabilized, Optimized and Manual flight modes. Reflex V3 is a trusty co-pilot that is perfect for pilots of any skill level.
Don’t miss out on one of the most revolutionary FMS aircraft, the amphibious ranger V2!
Notes to Buyers:
① RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
② PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
③ Due to a printing error, the packaging may indicate '1220mm Ranger V3 With Reflex V2.' The correct model is '1220mm Ranger V2 With Reflex V3.'
④ A T6 Torx screwdriver is needed to install the vertical stabilizer's connecting rod.
(Customers who have purchased Ranger V2 can log in to their account and redeem a FREE T6 Torx screwdriver with 100 points!)
⑤ For the float-equipped Ranger V2, the plane and floats will be sent as two separate packages.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
FMS 1:18 FCX18 LC80 Toyota Land Cruiser 80 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:24 FCX24M Land Rover Camel Trophy Edition RTR
Description
| Model | Discovery | Range Rover | Defender 110 | Defender 90 |
| Length | 232mm | 227mm | 240mm | 214mm |
| Width | 105mm | 103mm | 107mm | 107mm |
| Height | 133mm | 120mm | 128mm | 128mm |
| Wheelbase | 134mm | 134mm | 135mm | 111mm |
| Tire F/R | Φ 48*17mm | Φ 48*17mm | Φ 50*20mm | Φ 50*20mm |
| Approach Angle | 52° | 64° | 55° | 55° |
| Departure Angle | 55° | 47° | 49° | 51° |
| Minimum Ground Clearance |
28mm | 28mm | 29mm | 24mm |
| Motor | 050 Motor Set | |||
| Battery | 7.4v 380mAh | |||
FMS 1:24 FCX24 Power Wagon RTR
Description
The World's First 1/24 Climbing Rock Crawler with Two-speed Transmission - Power Wagon FCX24
FCX24 meticulously designed by FMS team will redefine the small scale climbing rc car. As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. It is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.
What's in Box:
- 1 x 1:24 Power Wagon RTR
- 1 x G3 V1 Transmitter
- 1 x R3A V1 Receiver (installed)
- 1 x 130 Brushed Motor (installed)
- 1 x 7.4V 380mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
- 4 x AAA Batteries for Transmitter
FMS 1:18 FCX18 Chevrolet K10 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1500mm Cessna 182 RTF / PNP
Description
|
Overall length |
1250mm /49.2 in |
|
Flying weight |
~2000g |
|
Motor size |
3541-KV840 |
|
Wing load |
60 g/dm² ( 0.12oz/in²) |
|
Wing area |
33.3 dm² ( 515.7 sq.in) |
|
ESC |
40A |
|
Prop Size |
11*6, 3-blade |
|
Servo |
9g Servo x 7 |
|
Recommended battery |
14.8V2200mAh-3200mAh 25C |
FMS 850mm (33.4") Ranger with Reflex V3, PNP / RTF
Description
Skill, know-how and space has always been limiting factors in bringing new enthusiasts into the wonderful world of R/C aviation, until now!
FMS has always been dedicated to enabling pilots of every skill level to enjoy the thrills of flight. Innovation then, is in our DNA.
FMS is proud to announce the 850mm Ranger. Like its sibling, the high winged airframe design with a tricycle landing gear, is very easy to fly by default. A dedicated flight control paired with a GPS sytem allows pilots to fly under beginner, intermediate and fully manual flight modes. An innovative flight perimeter fence and return to home functions provide bulletproof reliability and ease of mind- flying has never been so simple.
Flight perimeter fence function: if the aircraft is in excess of 120m away from the pilot, the aircraft will return to home automatically, with the pilot having the option of taking over the controls at any time. Once over the home point, the aircraft will circle at a 25m altitude at roughly 40km/h.
Return to home function: in the off chance that the pilot loses orientation of the aircraft, the return to home function can be triggered and the aircraft will fly back to the home point. Like the flight perimeter function, this function does not take away the pilots' ability to control the aircraft at any time.
Once over the home point, the Ranger 850 circles until further control inputs are given.
Absolute beginners rejoice! The FMS 850mm Ranger has everything that is needed for flight! A 12A esc/receiver combo reduces the need to connect cables and a 2315-3850kv motor, 7.4V 850mAh 25c battery and four 1.9g micro servos give the lightweight 305g aircraft incredible performance. Fly at a small park, basketball court or even your own back yard!
The innovative 850mm Ranger is the perfect way to start earning your wings!
Types Function:
PNP ( with Reflex V3): Have reflex function, without flight perimeter fence & return to home function.
Exclusive Innovative Reflex system allows pilots to fly under beginner, intermediate and fully manual flight modes. On Stabilized Mode, it can control surface travel allows tame flight characteristics for beginner pilots and can turn on an emergency recovery flight mode when lose control. On Optimized Mode, It Minimizes environmental effects on the airframe - pilot retains maximum control while the Reflex system neutralizes attitude changes caused by whin gusts. OFF Mode, Reflex system off - RC pilot can reach unlimited roll movement by themself improving skill.
RTF (with Gyro):
Have flight perimeter fence & return to home function, without reflex function.
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
| Specification | |
| Wingspan | 850mm /33.5in |
| Overall Length | 657mm /25.8 in |
| Flying Weight | Around 290g |
| Motor Size | 2315 KV3850 |
| ESC | 12A |
| Servo | 1.9gX4pcs |
| Radio | 4CH Channel |
| CG (center of gravity) | 40-50mm(From Leading Edge) |
| Prop Size | 6*5 |
| Recommended Battery | 7.4V 850mAh 20C |
| Battery Connector | JST |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | No |
| Retracts | No |
| Approx. Flying Duration | 5minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Beginner |
| Assembly Time | 3minutes |
| Wing Load | 23.6 g/dm² ( 0.05oz/in²) |
| Wing Area |
12.3 dm² ( 190.5 sq.in) |
FMS EDF Jet 70mm Viper V2 PNP 15th Anniversary Edition
Description
The 70mm Viper was not always the first choice for players transitioning from prop-driving airplane to jet – the original wire landing gear was not so friendly to pilots unfamiliar with jet takeoffs and landings – but now, she is! FMS 15th Anniversary Edition 70mm Viper, here we go!
There are a lot of FMS jet machines, but the 70mm Viper always soars above the crowd. The comment from players that the Viper “does any acrobatic trick you can throw at it" is a true portrayal of the excellent performance of this aircraft. The 15th anniversary edition of the Viper has been improved based on the previous work – switching out wire landing gear for a full set of CNC metal shock absorbing landing gear (A.K.A kneeling nose) – achieving simplicity, stability and ease of handling during the entire process of takeoff, flight and landing. Digital metal-toothed steering gear and ball-head joint rods provide precise control. The clip-on cockpit design facilitates battery access, and also effectively ensures that the cockpit will not fall off during violent flight. Lightweight EPO materials increase the durability and precision of the aircraft. The optimized airframe curves, long wings and wingtips reduce wind resistance and make the flight attitude of the entire aircraft clearer. 70mm 12-blade EDF unit, high speed brushless 3060 in-runner motor, 80A ESC, in combination with the recommended 6S 3300mAh lithium polymer battery, provide excellent vertical performance, speed range and instantaneous throttle response in flight. Perhaps even more fascinating is the sound the powertrain makes --it's almost like a real turbine.
Specification
| Wingspan | 1100mm /43.3 in |
| Overall Length | 1025mm / 40.4 in |
| Flying Weight | Around 1795 g |
| Motor Size | 3060-KV1900 inner running |
| ESC | 80A |
| Servo | 9g metal digital servo x 8 |
| Radio | 6 Channel |
| CG (center of gravity) | 90-95mm(From Leading Edge) |
| EDF | 70mm Ducted Fan 12-blade |
| Recommended Battery | 6S 3300mAh 35C |
| Battery Connector | EC5 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 4 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Intermediate |
| Assembly Time | 10-30 minutes |
| Wing Load | 93.5g/dm² ( oz/in²) |
| Wing Area | 19.2 dm² ( sq.in) |
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
FMS 1:10 FCX10 LC80 Toyota Land Cruiser 80 RS
Description
| Length | 572mm |
| Width | 251mm |
| Height | 288mm |
| Wheelbase | 325mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 51° |
| Departure Angle | 42° |
| Ground Clearance | 76mm |
| Motor | 550 32T Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 6CH Remote Control System |
| Recommended Battery | 2S or 3S 5000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 40mm |
FMS EDF Jet 64mm Futura PNP
Description
| Wingspan | 900mm /35.4 in |
| Overall Length | 995mm /39.2 in |
| Flying Weight | Around 1150g |
| Motor Size | 2840 KV3150 |
| ESC | 40A |
| Servo | 9gX8pcs |
| Radio | 6CH Channel |
| CG (center of gravity) | 85-95mm |
| Prop Size | 64mm Ducted Fan 11-blade |
| Recommended Battery | 14.8V2200mAh-2600mAh 25c |
| Battery Connector | XT60 |
| Aileron | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | No |
| Approx. Flying Duration | 3 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Upper-Intermediate |
| Assembly Time | 10 minutes |
| Wing Load | 71.8 g/dm² ( 0.14oz/in²) |
| Wing Area | 16dm² ( 247.9 sq.in) |
FMS 1:24 FMT24 Chevrolet Colorado Monster Truck RTR
Description
| Length | 239mm |
| Width | 161mm |
| Height | 108mm |
| Wheelbase | 140mm |
| Tire F/R | D: 64.8mm, W: 33.4mm |
| Minimum Ground Clearance | 37mm |
| Approach Angle | 66° |
| Departure Angle | 53 ° |
| Motor | 370 brushed motor |
| Servo | 13g metal servo x 1, 9g servo x 1 |
| Battery | 2S Lipo 7.4V 900mAh 25C |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 20mins |
| Remote Control | G3 V3+ R3B transmitter, receiver with ESC group control board |
FMS 1:24 FCX24 Mercedes-Benz Unimog 421 RTR
Description
| Length | 249mm |
| Width | 153mm |
| Height | 160mm |
| Wheelbase | 142mm |
| Tire F/R | Φ 20mm |
| Approach Angle | 49° |
| Departure Angle | 69° |
| Ground Clearance | 40mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS 1:10 FCX10 Chevrolet K5 Blazer RS
Description
| Length | 548mm |
| Width | 249mm |
| Height | 285mm |
| Wheelbase | 324mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 58° |
| Departure Angle | 48° |
| Ground Clearance | 89mm |
| Motor | 550 Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 11CH Remote Control System |
| Recommended Battery | 2S Lipo 7.4V 2000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 30mm |
ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS
Description
ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS
This 1:10 Atlas 4x4 is designed in the form of an off-road truck racer. The car body is moulded with PC plastic, which is light in weight and has a low center of gravity; the nylon roll cage at the back can protect the car shell during rollovers. The rigid metal frame and four-link suspension system ensure strong climbing ability. The chassis has proven reliability. In both dynamic and static aspects, the real vehicle has been painstakingly restored.
What's in Box:
- 1 x 1:10 1:10 Atlas 4x4 RS
- 1 x 2.4GHz Transmitter
- 1 x 2-in-1 Receiver / 40A ESC (installed)
- 1 x 550 Brushed Motor (installed)
- 1 x 9g Plastic Digital Servo (installed)
- 1 x 15kg Metal Digital Servo(installed)
- 1 x Product Manual
Need to Complete:
- 4 x AA Batteries for Transmitter
- Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)
Specification:
- Length: 537mm
- Width: 241mm
- Height: 247mm
- Wheelbase: 340mm
- Tire F/R: Φ 120mm
- Approach Angle: 63°
- Departure Angle:53°
- Ground Clearance: 79mm
- Motor: 35T 550 Brushed motor
- Driving speed: up to 15km/h
- Remote control distance: 80m
- Approx. operating duration time: 20mins
- Remote control: 2.4GHz Transmitter (Fibre Style) & Receiver Set
EAZYRC 1:18 Chevrolet Colorado Off-Road Truck RTR Brushless Version
Description
Overview
If you're looking for your first 1:18 RC monster truck, look no further than the EAZYRC 1:18 Chevrolet Colorado, licensed by General Motors LLC. 17g digital servo, 45A brushless ESC, 2S Li-Po battery, and a 4-pole high-torque brushless motor provide sufficient power for the full-time four-wheel drive system. The top speed reaches 45 km/h.
The chassis uses a honeycomb structure with metal reinforcements to increase the overall strength, and the durability is superior to that of similar products. The all-metal gears and metal differentials plus durable steel drive shafts, provide reliable heavy-duty transmission and can withstand extreme high-speed impacts. The whole vehicle adopts a modular chassis design so that the power system, electronic equipment, and differential components are easy to disassemble and the daily vehicle maintenance is simple. The all-metal oil-filled shock absorbers are proven to withstand the impact of high-speed jumps. The tires with asymmetric tread patterns provide EAZYRC 1:18 Chevrolet Colorado with excellent grip, making it easy to run smoothly on almost any road.
What's in Box
1 x 1:18 Chevrolet Colorado RTR
1 x 2.4G Transmitter
1 x R4A Receiver(installed)
1 x 45A Brushless ESC(installed)
1 x 370 Brushless Motor (installed)
1 x 17g Digital Servo (installed)
1X 7.4V 1050mAh LIPO Battery
1 x USB Charger
1 x Hex Wrench Socket
1 x Product Manual
Need to Complete
4 x AA Batteries for Transmitter
Specification
| Length | 310mm |
| Width | 222mm |
| Height | 140mm |
| Wheelbase | 174mm |
| Minimum Ground Clearance | 42mm |
| Motor | 370 brushless motor |
| Battery | 2S Lipo 7.4V 1050mAh |
| Remote control distance | 80m |
| Approx. operating duration time | 10mins |
| Remote control | 2.4GHz |
FMS 1:18 FCX18 Hummer EV Pickup Truck RTR
Description
| Length | 328mm |
| Width | 138mm |
| Height | 133mm |
| Wheelbase | 199mm |
| Tire F/R | Φ 66*22mm |
| Minimum Ground Clearance | 40mm |
| Approach Angle | 51° |
| Departure Angle | 41° |
| Motor | 180 Brushed motor |
| Battery | 2S LiPo 7.4V 900mAh x1 |
| Remote control distance | 30m |
| Approx. operating duration time | 45mins |
| Remote control | MG41-BS transmitter，R4A3 receiver with ESC group control board |
FMS EDF Jet 80mm F-86 Sabre PNP
Description
| Wingspan | 1220mm /48 in |
| Overall Length | 1165mm /46 in |
| Flying Weight | Around 3050g |
| Motor Size | 3665-KV2000 |
| ESC | 100A |
| Servo | 13gX8, 9gX3 |
| Radio | 6 Channel |
| CG (center of gravity) | 180-190mm |
| Prop Size | 80mm Ducted Fan 12-blade |
| Recommended Battery | 22.2V 4000mAh-5500mAh 45c |
| Battery Connector | EC5 |
| Battery Compartment Size | 200*68*45mm |
| Aileron | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 3 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Upper-Intermediate |
| Assembly Time | 10 minutes |
| Wing Load | 95.3 g/dm² (0.18oz/in²) |
| Wing Area | 32dm² (495.8 sq.in) |
FMS 1100mm P-51 Mustang V2 PNP
Description
By popular demand, FMS is proud to announce the re-release of the 1100mm P-51 racer; wearing the optional trim scheme of Dago Red, Miss America, Voodoo and Blue Thunder II.
Scale detailing and upgraded electronics are impeccably integrated: the FMS 1100mm P-51 racer features a realistic four-bladed propeller, forward tilting landing gear, functional flaps, scale cockpit, engine exhausts, air intake, wing fences and antenna.
Built with robust EPO material and painted with environmentally friendly water-based paint, the P-51 racer looks gorgeous at any speed and altitude. Reach speeds in excess of 90 mph thanks to the highly efficient four-bladed prop, 900kV motor, 80A ESC and 14.8V 2,600 mAh battery.
Feel the heart pounding exhilaration of an unlimited class air racer with the FMS 1100mm P-51 racer today!
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
| Specification | |
| Wingspan | 42.1in |
| Overall Length | 38.1in |
| Flying Weight | Around 1390 g |
| Motor Size | Brushless3948-900KV |
| ESC | 80A |
| Servo |
9g x 6pcs
|
| Radio | 6Channel |
| CG (center of gravity) | 70-80mm (From Leading Edge) |
| Prop Size | 10.5*8 4 |
| Recommended Battery | 14.8V 2600MAH 35C |
| Battery Connector | EC5 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 8min |
| Minimum Age Recommendation | 14+ |
| Experience Level | Expert |
| Assembly Time | 15mins |
| Wing Load | 67.1g/d㎡( 0.15oz/in²) |
| Wing Area | 20.7d㎡(320.8sq.in) |
