Adventurer's Staple, Off-Road Legends - 1:12 Land Rover

The Land Rover Series 2 is an iconic off-road vehicle that well represents the adventurous spirit of the Land Rover brand. It combines outstanding durability with outstanding versatility, making it the ideal companion for outdoor enthusiasts and adventure seekers.

The new Land Rover Series II launched by FMS inherits the essence of real cars in terms of highly realistic appearance, comfortable fully simulated interior, durable chassis and powerful power system.

Whether traversing rugged mountains, traversing muddy trails, or crossing rivers, FMS-Land Rover Series 2 can bring an exciting and reliable handling experience, embodying the spirit of pioneering adventure, allowing players to create unforgettable memories.

What's in the box:

• 1 x 1:12 Land Rover Series II RTR
• 1 x 2.4G Transmitter + 2 in1 ESC & Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 3 x 3Y 9g Digital Servo (installed)
• 1 x 2S Lipo 7.4V 380mAh Battery
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual
• 1 x Bind Connector
  
  

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 270mm
  
• Width: 135mm
• Height: 149mm
• Wheelbase: 169mm
• Tire F/R : Φ 54.8*19.5mm
• Minimum Ground Clearance: 31mm
• Approach Angle: 57°
• Departure Angle: 42 °
• Motor: 180 Brushed motor
• Battery: 2S Lipo 7.4V 380mAh x1
• Remote control distance: 30m
• Approx. operating duration time: 20mins
• Remote control: MG41-BS transmitter, R4A1 receiver with ESC group control board

The "Steel Chariot" of a Passionate and Tough Warrior

The FMS HUMMER H1 is coming strong! Unlike the common scale crawlers on the market, FMS HUMMER H1 is a very high-detail RC crawler that comes complete with a full scale chassis structure and drivetrain system, and an exquisite scale interior with full door function.
Power comes from a 370 motor. Two servos respectively control both the switch between high and low speed gears and the operation of the transfer case, thus switching between rear drive and four-wheel drive. Both the front and rear differentials also have a differential lock function, each driven by a servo which can be locked by remote control. Four metal drive shafts transmit power from the differential to the reduction gear assembly, commonly known as a "portal axle". The HUMMER H1 also has a full metal gear-set and 47 ball-bearings. We have included the rear wheel steering as an additional hidden function, so you now have a total of 4 steering modes! The extra mode, which can reduce the steering radius by 50%, is ideal in confined spaces.
The HUMMER H1 uses a front mid-engine layout just like the real vehicle, and the hood is designed to be flipped forward. Four doors can all be opened, and the smart door lock mechanism is a separate unit. The cabin also features a highly detailed dashboard and moving steering wheel that turns with the main steering. The roof is removable and the windshield can be lowered forward. The body of the Hummer is mainly made of aluminum alloy and fiberglass, and the fixing method is riveting. A 2.4G 7CH digital proportional radio system, a receiver/ ESC/ light control three-in-one unit, 7 servos（including 13g metal gear servo x 2pcs)
The FMS HUMMER H1 is presented as it should be – a no compromise “work of art” scale vehicle that is sure to be one for collectors and enthusiasts alike!  

What's in Box

1 x 1:12 HUMMER H1 RS
1 x 2.4GHz Transmitter
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 370 Brushed Motor (installed)
5 x 9g Plastic Digital Servo (installed)
2 x 13g Metal Digital Servo(installed)
1 x Hex Wrench Socket
1 x Product Manual

Need to Complete

4 x AAA Batteries for Transmitter
Battery for Kit (Recommended 2S 7.4V 2000mAh 20C XT30 plug; Battery compartment size: L 90mm x W 35mm x H 20mm)

Specification

Length: 408mm
Width: 222mm
Height: 162mm
Wheelbase: 272mm
Tire F/R: Φ 78 × 25mm
Approach Angle: 52°
Departure Angle: 39°
Speed: the highest fast gear is 8km/h, the highest slow gear is 5km/h
Minimum Ground Clearance: 40mm
Motor: 370 Brushed motor
Remote control distance: 30m
Approx. operating duration time: 20mins
Remote control: G7 + R7A Transmitter receiver set

1:12 TOYOTA FJ45 Pickup Truck

To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.

The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.

What's in the box:

• 1 x 1:12 TOYOTA FJ45 RTR
• 1 x 2.4G Transmitter
• 1 x 2-in-1 Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 9g Plastic Digital Servo (installed)
• 1 x 2S 7.4V 380mAh Battery with PCM
• 1 x USB Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 345mm
• Width: 127mm
• Height: 124mm
• Wheel base: 270mm
• Tire: D:60mm , W:15mm
• Ground clearance: 29mm
• Approach angle: 58°
• Departure angle: 29.9°
• The Highest Driving speed: 8km/h
• Remote control distance: 30m
• Play time: 20 minute