VIP Adventurer
Chevrolet Collection
1 - 5 of 5 products
-
US only Save $40.00
FMS 1:24 FCX24 Chevrolet K5 BLAZER PRO RTR 18th Anniversary Brushless Edition In stock$159.99 USD $199.99 USD$159.99 USD -
Best seller Save $50.00
-
Save $30.00
FMS 1:24 FCX24 Chevrolet K5 BLAZER PRO RTR 18th Anniversary Brushless Edition
Description
K5 Blazer PRO
FMS 18th Anniversary Brushless Edition
Eighteen years of seasons passing, eighteen years of challenges and triumphs, eighteen years of growth and development—worthy of pride and honor.
The 18th Anniversary limited edition paint job from FMS is officially matched to the CHEVROLET K5 BLAZER, a fully licensed scale model from General Motors.
The model features the FCX24 chassis, and in addition to retaining the two-speed mechanical transmission from the original K5 BLAZER, FMS has equipped it with a 1212 outrunner brushless motor for the first time. This motor offers exceptionally precise linear control, providing an experience far superior to that of a brushed motor. You can feel the vehicle crawl at a snail's pace with smooth, consistent low-speed control. Additionally, the outrunner design brings excellent dynamic balance characteristics, further reducing noise and vibration levels without sacrificing performance.
Features:
- NEW! FMS 18th Anniversary limited edition painted simulation car body
- NEW! External rotor brushless motor, enabling ultra-low speed crawling
- NEW! Full ball bearings
-
NEW! Metal tie rods, metal straight axle teeth, metal gearbox teeth
- NEW! Steering servo with metal teeth
- Completed assembly
- Micro two-speed mechanical transmission
- Portal axle (metal gears)
- 4-link suspension
- High-strength mixed-fiber nylon unibody frame
- Quick release structure
- Front grille, front bumper, and luggage rack lights are available as optional extras
What's in the box:
- 1 x 1:24 Chevrolet K5 Blazer PRO RTR
- 1 x 2.4GHz Transmitter
- 1 x Brushless ESC (installed)
- 1 x Brushless Motor 3200KV (installed)
- 1 x 7.4V 380 mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 253mm
- Width: 129mm
- Height: 128mm
- Wheelbase: 139mm
- Tire F/R : Φ 54.8*19.5mm
- Minimum Ground Clearance: 38mm
- Approach Angle: 57°
- Departure Angle: 45°
- Motor: 1212 brushless motor 3200KV
- Battery: 2S Lipo 7.4V 380mAh
- Remote control distance: 30m
- Approx. operating duration time: 30mins
- Remote control: MG44 + R4P1 transmitter receiver set bs version
FMS 1:10 FCX10 Chevrolet K5 Blazer RS
Description
| Length | 548mm |
| Width | 249mm |
| Height | 285mm |
| Wheelbase | 324mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 58° |
| Departure Angle | 48° |
| Ground Clearance | 89mm |
| Motor | 550 Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 11CH Remote Control System |
| Recommended Battery | 2S Lipo 7.4V 2000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 30mm |
FMS 1:18 FCX18 Chevrolet K10 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:24 FCX24 Chevrolet K5 Blazer RTR
Description
| Length | 253mm |
| Width | 129mm |
| Height | 128mm |
| Wheelbase | 139mm |
| Tire F/R | Φ 54.8*19.5mm |
| Approach Angle | 57° |
| Departure Angle | 45° |
| Ground Clearance | 38mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS 1:24 FMT24 Chevrolet Colorado Monster Truck RTR
Description
| Length | 239mm |
| Width | 161mm |
| Height | 108mm |
| Wheelbase | 140mm |
| Tire F/R | D: 64.8mm, W: 33.4mm |
| Minimum Ground Clearance | 37mm |
| Approach Angle | 66° |
| Departure Angle | 53 ° |
| Motor | 370 brushed motor |
| Servo | 13g metal servo x 1, 9g servo x 1 |
| Battery | 2S Lipo 7.4V 900mAh 25C |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 20mins |
| Remote Control | G3 V3+ R3B transmitter, receiver with ESC group control board |
