VIP Adventurer
RC Car - Shop $119-169
Use the filter menu to find your desired model!
1 - 12 of 12 products
-
Europe Only Save $50.00
-
Save $50.00
-
US only Save $50.00
EAZYRC 1:18 Chevrolet Colorado Off-Road Truck RTR Brushless Version In stockFrom $99.99From $99.99
FMS 1:24 FCX24 Chevrolet K5 Blazer RTR
Description
| Length | 253mm |
| Width | 129mm |
| Height | 128mm |
| Wheelbase | 139mm |
| Tire F/R | Φ 54.8*19.5mm |
| Approach Angle | 57° |
| Departure Angle | 45° |
| Ground Clearance | 38mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS 1:18 FCX18 LC80 Toyota Land Cruiser 80 V2 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:24 FCX24M Land Rover Camel Trophy Edition RTR
Description
| Model | Discovery | Range Rover | Defender 110 | Defender 90 |
| Length | 232mm | 227mm | 240mm | 214mm |
| Width | 105mm | 103mm | 107mm | 107mm |
| Height | 133mm | 120mm | 128mm | 128mm |
| Wheelbase | 134mm | 134mm | 135mm | 111mm |
| Tire F/R | Φ 48*17mm | Φ 48*17mm | Φ 50*20mm | Φ 50*20mm |
| Approach Angle | 52° | 64° | 55° | 55° |
| Departure Angle | 55° | 47° | 49° | 51° |
| Minimum Ground Clearance |
28mm | 28mm | 29mm | 24mm |
| Motor | 050 Motor Set | |||
| Battery | 7.4v 380mAh | |||
FMS 1:24 FCX24 Power Wagon RTR
Description
The World's First 1/24 Climbing Rock Crawler with Two-speed Transmission - Power Wagon FCX24
FCX24 meticulously designed by FMS team will redefine the small scale climbing rc car. As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. It is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.
What's in Box:
- 1 x 1:24 Power Wagon RTR
- 1 x G3 Transmitter
- 1 x R3A Receiver (installed)
- 1 x 130 Brushed Motor (installed)
- 1 x 7.4V 380mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
- 4 x AAA Batteries for Transmitter
FMS 1:24 FCX24M Toyota Tacoma RTR
Description
Introduction
Scale Authenticity Meets Off-Road Adventure
The FMS Tacoma brings the rugged spirit of Toyota’s legendary pickup into the world of RC. This officially licensed 1:24-scale crawler blends true-to-scale design with serious off-road performance in a compact, go-anywhere crawler.
From the ABS hard body to the molded grille, mirrors, door handles, and bumpers—every detail is captured. It’s available in three factory-matched colors—Gray, Red, and Blue.
Built on the next-generation FCX24M chassis, the Tacoma features a 153mm (6.02") extended wheelbase, ladder-frame construction, and solid axles for increased durability and torque control. The all-new off-road tires deliver excellent grip and ground clearance, giving this micro-crawler big-truck performance.
Powered by a high-torque 050 motor and equipped with a two-speed transmission, the Tacoma is ready to crawl slowly or hit top speed on demand. The included 2S 380 mAh LiPo battery delivers up to 30 minutes of runtime per charge.
Whether you’re building micro-terrain indoors or taking on backyard trails, the FMS Tacoma is ready for whatever comes next. It’s not just a model—it’s an RC tribute to one of the most dependable off-road trucks ever built.
What’s in the Box:
- 1 × 1:24 FCX24M Toyota Tacoma RTR (with installed electronics)
- 1 × 2.4GHz G3 Transmitter
- 1 × R3A Receiver (pre-installed)
- 1 × 050 Brushed Motor (pre-installed)
- 1 × Product Manual
Needed to Complete:
- 4 × AAA Batteries for the Transmitter
Specification:
| Length | 253mm |
| Width | 105mm |
| Height | 105mm |
| Wheelbase | 153mm |
| Tread (F/R) | 86 mm |
| Ground Clearance | 30 mm |
| Approach Angle | 49° |
| Departure Angle | 43° |
| Tire Size | Ø47 × 17 mm |
| Transmitter | G3 2.4GHz |
| Receiver/ESC Unit | R3A with integrated ESC |
| Motor | 050 Brushed Motor |
| Recommended Battery | 7.4V 380mAh 2S LiPo Battery with 51005 2-Pin Male and XH2.54 3-Pin Male Connectors |
| Drive System | 4WD |
| Bearings | Full metal ball bearings |
| Waterproof Rating | Splash-proof |
| Runtime | Up to 30 minutes |
| Control Range | 80+ meters (open areas) |
FMS 1:24 FCX24 Mercedes-Benz Unimog 421 RTR
Description
| Length | 249mm |
| Width | 153mm |
| Height | 160mm |
| Wheelbase | 142mm |
| Tire F/R | Φ 20mm |
| Approach Angle | 49° |
| Departure Angle | 69° |
| Ground Clearance | 40mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS 1:24 FMT24 Chevrolet Colorado Monster Truck RTR
Description
| Length | 239mm |
| Width | 161mm |
| Height | 108mm |
| Wheelbase | 140mm |
| Tire F/R | D: 64.8mm, W: 33.4mm |
| Minimum Ground Clearance | 37mm |
| Approach Angle | 66° |
| Departure Angle | 53 ° |
| Motor | 370 brushed motor |
| Servo | 13g metal servo x 1, 9g servo x 1 |
| Battery | 2S Lipo 7.4V 900mAh 25C |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 20mins |
| Remote Control | G3 V3+ R3B transmitter, receiver with ESC group control board |
EAZYRC 1:18 Chevrolet Colorado Off-Road Truck RTR Brushless Version
Description
Overview
If you're looking for your first 1:18 RC monster truck, look no further than the EAZYRC 1:18 Chevrolet Colorado, licensed by General Motors LLC. 17g digital servo, 45A brushless ESC, 2S Li-Po battery, and a 4-pole high-torque brushless motor provide sufficient power for the full-time four-wheel drive system. The top speed reaches 45 km/h.
The chassis uses a honeycomb structure with metal reinforcements to increase the overall strength, and the durability is superior to that of similar products. The all-metal gears and metal differentials plus durable steel drive shafts, provide reliable heavy-duty transmission and can withstand extreme high-speed impacts. The whole vehicle adopts a modular chassis design so that the power system, electronic equipment, and differential components are easy to disassemble and the daily vehicle maintenance is simple. The all-metal oil-filled shock absorbers are proven to withstand the impact of high-speed jumps. The tires with asymmetric tread patterns provide EAZYRC 1:18 Chevrolet Colorado with excellent grip, making it easy to run smoothly on almost any road.
What's in Box
1 x 1:18 Chevrolet Colorado RTR
1 x 2.4G Transmitter
1 x R4A Receiver(installed)
1 x 45A Brushless ESC(installed)
1 x 370 Brushless Motor (installed)
1 x 17g Digital Servo (installed)
1X 7.4V 1050mAh LIPO Battery
1 x USB Charger
1 x Hex Wrench Socket
1 x Product Manual
Need to Complete
4 x AA Batteries for Transmitter
Specification
| Length | 310mm |
| Width | 222mm |
| Height | 140mm |
| Wheelbase | 174mm |
| Minimum Ground Clearance | 42mm |
| Motor | 370 brushless motor |
| Battery | 2S Lipo 7.4V 1050mAh |
| Remote control distance | 80m |
| Approx. operating duration time | 10mins |
| Remote control | 2.4GHz |
FMS 1:10 Ford F100 Monster Truck 2WD RTR / RS
Description
| Product Size | 476 x 335 x 240mm |
| Wheelbase | 294mm |
| Tire Size | D130 x W70mm |
| Ground Clearance | 45mm |
| Motor | 550 Brushed Motor |
| Steering Servo | 15kg x 1 |
| Drive System | 2WD |
| Remote Control | FS-FMS-G4P1-BS |
| Receiver | FS-FMS-R4D-ESC-BS(40A) |
| Remote Control Distance | 150m |
| Recommended Battery | 2S Lipo Battery 7.4V 3000mah 30C with XT60 Connector |
| Battery Compartment | 152 x 49.5 x 30mm |
FMS 1:24 FSC24 Chaser Short Course Truck RTR
Description
FSC24 Chaser - 1:24 Short Course Truck
The Perfect Short Course Truck for Beginners to Master Speed and Control.
Background
The Baja 1000, which began in 1967, is one of the most challenging and thrilling off-road events in the world. Short-course trucks, often referred to as light trucks, are typically designed for urban use and short-distance transport, prioritizing efficiency and agility. However, in events like the Dakar Rally, these trucks undergo extensive modifications, including upgrades to their suspension, chassis, specialized tires, and cockpit safety features. These enhancements equip the trucks to navigate harsh terrains such as desert dunes, rocky landscapes, river crossings, and mountains, enabling them to perform exceptionally well under extreme conditions.
Introduction
The FSC24 Chaser is available in two striking paint schemes, featuring a plastic shell crafted using a blister process and adorned with eye-catching stickers that stand out on any terrain.
FMS has developed a new-generation FSC24 chassis, equipped with front independent suspension and a rear straight axle. The frame is constructed from high-strength nylon, providing an ideal balance of lightness and durability. The mid-mounted power unit, with its low center of gravity, incorporates a two-speed transmission and a 370 high-speed brushed motor into a single compact unit. The two-speed transmission is controlled via CH3 on the remote, while metal planetary gear differentials at both axles ensure robust torque delivery for high-speed off-roading, exceptional cornering, and a realistic stance.
What's in the box:
- 1 x 1:24 FSC24 Chaser RTR
- 1 x 2.4GHz G3 V3 Transmitter
- 1 x R3B Receiver with ESC Group Control Board (installed)
- 1 x 370 Brushed Motor (installed)
- 2 x 13g Metal Servo (installed)
- 1 x 2S Lipo 7.4V 900mAh 25C with XT30 Connector
- 1 x USB Charger
- 1 x Product Manual
Need to Complete:
- 4 x AAA Batteries for Transmitter
Specification:
| Length | 236mm |
| Width | 143mm |
| Height | 107mm |
| Wheelbase | 140mm |
| Tire F/R | D: 54mm, W: 23mm |
| Minimum Ground Clearance | 33mm |
| Approach Angle | 63° |
| Departure Angle | 53° |
| Motor | 370 Brushed Motor |
| Servo | 13g Metal Servo x 2 |
| Battery | 2S Lipo 7.4V 900mAh 25C with XT30 Connector |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 30mins |
| Remote Control | G3 V3+ Transmitter, R3B Receiver with ESC Group Control Board |
FMS 1:24 FCX24 Lemur RTR
Description
| Length | 209mm |
| Width | 128mm |
| Height | 120mm |
| Wheelbase | 136mm |
| Tire | D: 66mm, W:22mm |
| Minimum Ground Clearance | 41mm |
| Reduction ratio | (High Gears ) 24.75/(Low Gears ) 99 |
| Motor | 130 Brushed motor |
| Battery | 2S Lipo 7.4V 380mAh x1 |
| Remote control distance | 80m |
| Approx. operating duration time | 20mins |
| Remote control | G3+ R3A transmitter, receiver with ESC group control board |
| Key functions | Two Speed Transmission/Portal Axle |
FMS FCX24M 1:24 Land Rover Camel Trophy Edition RTR
Description
Land Rover Family — A Legendary Off-Road Legacy in 1/24 Scale
Officially licensed by Land Rover, the FMS FCX24M Land Rover Family brings iconic off-road machines to life in 1/24 scale. Built on the new FCX24M realistic crawling chassis and paired with detailed hard-shell bodies, each model faithfully captures the look and capability of the original Range Rover, Discovery, Defender 90, and Defender 110—vehicles that defined the legendary Camel Trophy era.
Reviving the Camel Trophy Spirit
From 1980 to 2000, the Camel Trophy pushed both drivers and machines to their limits across the world’s toughest terrain. Known as the “Olympics of 4x4,” it showcased Land Rover’s toughest vehicles in their iconic yellow-sand livery. The FCX24M Land Rover series celebrates that history—inviting you to relive the adventure in true scale detail.
Specs:
| Model | Discovery | Range Rover | Defender 110 | Defender 90 |
| Length | 232mm | 227mm | 240mm | 214mm |
| Width | 105mm | 103mm | 107mm | 107mm |
| Height | 133mm | 120mm | 128mm | 128mm |
| Wheelbase | 134mm | 134mm | 135mm | 111mm |
| Tire F/R | Φ 48*17mm | Φ 48*17mm | Φ 50*20mm | Φ 50*20mm |
| Approach Angle | 52° | 64° | 55° | 55° |
| Departure Angle | 55° | 47° | 49° | 51° |
| Minimum Ground Clearance |
28mm | 28mm | 29mm | 24mm |
| Motor | 050 Motor Set | |||
| Battery | 7.4v 380mAh | |||
What's In The Box:
