Adventurer's Staple, Off-Road Legends - 1:12 Land Rover

The Land Rover Series 2 is an iconic off-road vehicle that well represents the adventurous spirit of the Land Rover brand. It combines outstanding durability with outstanding versatility, making it the ideal companion for outdoor enthusiasts and adventure seekers.

The new Land Rover Series II launched by FMS inherits the essence of real cars in terms of highly realistic appearance, comfortable fully simulated interior, durable chassis and powerful power system.

Whether traversing rugged mountains, traversing muddy trails, or crossing rivers, FMS-Land Rover Series 2 can bring an exciting and reliable handling experience, embodying the spirit of pioneering adventure, allowing players to create unforgettable memories.

What's in the box:

• 1 x 1:12 Land Rover Series II RTR
• 1 x 2.4G Transmitter + 2 in1 ESC & Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 3 x 3Y 9g Digital Servo (installed)
• 1 x 2S Lipo 7.4V 380mAh Battery
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual
• 1 x Bind Connector
  
  

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 270mm
  
• Width: 135mm
• Height: 149mm
• Wheelbase: 169mm
• Tire F/R : Φ 54.8*19.5mm
• Minimum Ground Clearance: 31mm
• Approach Angle: 57°
• Departure Angle: 42 °
• Motor: 180 Brushed motor
• Battery: 2S Lipo 7.4V 380mAh x1
• Remote control distance: 30m
• Approx. operating duration time: 20mins
• Remote control: MG41-BS transmitter, R4A1 receiver with ESC group control board

1:10 Mashigan - BORN ADVENTURER

For adventurers, the road ahead is always rough and full of thorns, but whether there is a road or no road, this 1:10 Mashigan's 1.9 inch climbing tires can give you confidence, and meanwhile, the four-link suspension system gives you a guarantee of strong power, the metal trapezoidal beams provide you with a solid supportive structure. Even with a hard plastic car shell with a complete interior, Mashigan can easily overcome extreme road conditions. The real first-generation model uses leaf spring suspension, and adventurers will not ignore the history, the chassis can be installed with leaf spring suspension (sold separately) to restore the style of the first generation model. Pursuing the needs of climbing performance and restoration seems to be impossible, but through the compatible design of the chassis and the replacement of a few accessories, it can show a completely different shape. Two postures, and double the fun.

The exquisite interior and four-door full-opening design double the level of detail of this hard-shell RC model, which can be viewed statically or operated indoors. With climbing-level sturdy chassis and suspension system, FMS 1:10 Mashigan make it cool to go wild!

What's in the box:

1 x 1:10 Mashigan RS
1 x 2.4GHz Radio
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 550 Brushed Motor (installed)
1 x 9g Plastic Digital Servo (installed)
1 x 15kg Metal Digital Servo(installed)
1 x Product Manual

Need to Complete:

• 4 x AA Batteries for Radio
• Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)

Specification:

• Radio Control: 160 x 193 x 97mm, 221g (Battery not Included)
• Model Vehicle: 546 x 274 x 282mm, 4kg (Battery not Included)
• Tire: D:115mm, W:30mm
• Wheel Base: 339mm
• Ground Clearance: 82mm
• Approach Angle: 68°
• Departure Angle: 47°
• Driving Speed: up to 15km/h
• Remote Distance: 80m
• Play Time: 20 minute
  
  

The "Steel Chariot" of a Passionate and Tough Warrior

The FMS HUMMER H1 is coming strong! Unlike the common scale crawlers on the market, FMS HUMMER H1 is a very high-detail RC crawler that comes complete with a full scale chassis structure and drivetrain system, and an exquisite scale interior with full door function.
Power comes from a 370 motor. Two servos respectively control both the switch between high and low speed gears and the operation of the transfer case, thus switching between rear drive and four-wheel drive. Both the front and rear differentials also have a differential lock function, each driven by a servo which can be locked by remote control. Four metal drive shafts transmit power from the differential to the reduction gear assembly, commonly known as a "portal axle". The HUMMER H1 also has a full metal gear-set and 47 ball-bearings. We have included the rear wheel steering as an additional hidden function, so you now have a total of 4 steering modes! The extra mode, which can reduce the steering radius by 50%, is ideal in confined spaces.
The HUMMER H1 uses a front mid-engine layout just like the real vehicle, and the hood is designed to be flipped forward. Four doors can all be opened, and the smart door lock mechanism is a separate unit. The cabin also features a highly detailed dashboard and moving steering wheel that turns with the main steering. The roof is removable and the windshield can be lowered forward. The body of the Hummer is mainly made of aluminum alloy and fiberglass, and the fixing method is riveting. A 2.4G 7CH digital proportional radio system, a receiver/ ESC/ light control three-in-one unit, 7 servos（including 13g metal gear servo x 2pcs)
The FMS HUMMER H1 is presented as it should be – a no compromise “work of art” scale vehicle that is sure to be one for collectors and enthusiasts alike!  

What's in Box

1 x 1:12 HUMMER H1 RS
1 x 2.4GHz Transmitter
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 370 Brushed Motor (installed)
5 x 9g Plastic Digital Servo (installed)
2 x 13g Metal Digital Servo(installed)
1 x Hex Wrench Socket
1 x Product Manual

Need to Complete

4 x AAA Batteries for Transmitter
Battery for Kit (Recommended 2S 7.4V 2000mAh 20C XT30 plug; Battery compartment size: L 90mm x W 35mm x H 20mm)

Specification

Length: 408mm
Width: 222mm
Height: 162mm
Wheelbase: 272mm
Tire F/R: Φ 78 × 25mm
Approach Angle: 52°
Departure Angle: 39°
Speed: the highest fast gear is 8km/h, the highest slow gear is 5km/h
Minimum Ground Clearance: 40mm
Motor: 370 Brushed motor
Remote control distance: 30m
Approx. operating duration time: 20mins
Remote control: G7 + R7A Transmitter receiver set

1:12 TOYOTA FJ45 Pickup Truck

To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.

The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.

What's in the box:

• 1 x 1:12 TOYOTA FJ45 RTR
• 1 x 2.4G Transmitter
• 1 x 2-in-1 Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 9g Plastic Digital Servo (installed)
• 1 x 2S 7.4V 380mAh Battery with PCM
• 1 x USB Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 345mm
• Width: 127mm
• Height: 124mm
• Wheel base: 270mm
• Tire: D:60mm , W:15mm
• Ground clearance: 29mm
• Approach angle: 58°
• Departure angle: 29.9°
• The Highest Driving speed: 8km/h
• Remote control distance: 30m
• Play time: 20 minute

ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS

This 1:10 Atlas 4x4 is designed in the form of an off-road truck racer. The car body is moulded with PC plastic, which is light in weight and has a low center of gravity; the nylon roll cage at the back can protect the car shell during rollovers. The rigid metal frame and four-link suspension system ensure strong climbing ability. The chassis has proven reliability. In both dynamic and static aspects, the real vehicle has been painstakingly restored.

SUZUKI Jimny LJ10 1/6 - FMS's Another Great SUZUKI Vehicle with Fantastic Details

• "Jimny, a legendary car, which successfully filled the market gap with its small displacement, small size, low price and unique market position, was born to break the traditional views on off-road vehicles and demonstrated itself as a reliable tool for off-road enthusiasts.
• The predecessor of the Jimny was the Hope Star ON 4WD of Hope Motors, which was sold to Suzuki Motor in 1968. 1970 saw the introduction of the LJ10 weighing 600kg with a 359cc two-stroke inline twin-cylinder equipped.
• FMS is proud to present this 1/6 scale officially licensed Jimny LJ10. It boldly adopts a metal beam, non-load bearing chassis, front and rear leaf spring suspension and universal joints. The soft-rubber-wrapped seats feature a cushion like softness and can be collapsed, making them a perfect match for 1/6 figures.
• Power switch and maintenance is more convenient as motor, ESC, receiver and battery are all delicately integrated under the hood. Just open the hinged hood for full access.
• Marvelous interior detailing is on full display, from the adjustable windshield and safety bars at the door positions on both sides, the real-lenses mirrors, to the linked steering wheel; from the miniature shadow instrument panel, mechanical buttons, to the manual gearshift, foot pedal set and so on.
• Different scale styling can be achieved with the large rear bucket space, perfect for various simulated parts when the tailgate is lowered and the spare tire carrier is opened to the right.
• The black adjustable anti-roll bar provides convenient methods for the upgrade of parts in various materials and styles. In terms of lighting, the headlights are always on by default, while the front and rear turn signals and taillights are reserved for light bead positions, which is convenient for upgrading the lighting system." 
• Most of the early Japanese off-road vehicles were small in size. In order to save space, the spare tire was suspended outside the vehicle. As an important simulation structure of Jimny, the spare tire bracket of the model car can be rotated separately, and the spare tire can also be taken off. But please pay special attention, the spare tire protrudes out of the rear bumper, and the collision from the rear of the car may easily cause damage to the spare tire bracket and tailgate.  When running on a site with a risk of collision, it is recommended to take off the spare tire to avoid damage to the vehicle.

Specification

• Radio Control: 160 x 193 x 97mm
• Model Vehicle:  545.9 x 232.9 x 265.3mm
• Tire: D:115mm , W:30mm
• Wheel Base : 330mm
• Ground Clearance: 50mm
• Approach Angle:  41.2°
• Departure Angle: 48.4°

Weight

• Radio control: 221g (Battery not Included)
• Model Vehicle: 18kg(Battery not Included)

What's in the box

• Radio Control: AA X4
• Transmitter x1
• Manual x1
• 3Y 9g Digital Servo x1
• 3Y 15kg Mental Digital Servo x1
• 550Brushed Motor x1
• 40A Waterproof ESCx1

Need to Complete

• AA Batteries for Radio
• Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)

TRANSLATE with x

English

Arabic	Hebrew	Polish
Bulgarian	Hindi	Portuguese
Catalan	Hmong Daw	Romanian
Chinese Simplified	Hungarian	Russian
Chinese Traditional	Indonesian	Slovak
Czech	Italian	Slovenian
Danish	Japanese	Spanish
Dutch	Klingon	Swedish
English	Korean	Thai
Estonian	Latvian	Turkish
Finnish	Lithuanian	Ukrainian
French	Malay	Urdu
German	Maltese	Vietnamese
Greek	Norwegian	Welsh
Haitian Creole	Persian

TRANSLATE with

COPY THE URL BELOW

Back

EMBED THE SNIPPET BELOW IN YOUR SITE

Enable collaborative features and customize widget: Bing Webmaster Portal

Back