RC 3D Aerobatic Planes
1 - 6 of 6 products
FMS 1400mm F3A Olympus PNP
Description
Overview
A year in the making! Introducing the new FMS F3A OLYMPUS, the latest creation in the FMS Aerobatic line of models. With its elegant and graceful lines, superb flying qualities, the F3A is a must for the aerobatic pilot to add to his hangar. Working with RC Hobbyist’s worldwide, FMS has developed this aircraft to meet all the precision flying requirements needed to compete in F3a aerobatic competition.
Key features:
* Easy to complete, bolt-on final assembly
* Exceptionally strong 55 times EPO foam
* High-output, 4250 KV550 PAEP Brand High performance motor installed
* Digital high-speed, 17g digital metal gear servos installed
* Fully-hinged control surfaces with control links installed
* Modern cockpit details and pilot bust installed
* Efficient interior ducting provides generous component cooling
* Small up wing to make the performance better
* Large scale, stable flight platform handles windy condition.
* Large, scale control surfaces for aerobatic flight
* Spacious battery compartment gives pilots the option of flying light weight 5S batteries for full 3D or * larger 6S batteries for more sport and longer run times
* Strong landing gear to hand hard
* Pinned rudder hinges
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included
Specification | |
Wingspan | 1400 mm/ 55.1 in |
Overall Length | 1548 mm/ 61 in |
Flying Weight | Around 2400g /5.3lb |
Motor Size | Brushless 4258-KV550 |
ESC | 60A |
Servo | 17g digital metal gear Servo x 4 |
Radio | 4 Channel |
CG (center of gravity) | 180-190mm (From Leading Edge) |
Prop Size | 15*8 |
Recommended Battery | Li-Po 22.2V 3300mAh 35C |
Battery Connector | EC5 |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Retracts | No |
Approx. Flying Duration | 6 minutes |
Minimum Age Recommendation | 14+ |
Experience Level | Intermediate |
Assembly Time | 45 minutes |
Wing Load | 60.8 g/dm²(20 oz/sq.ft) |
Wing Area | 39.5 dm²/612 sq.in |
FMS 1020mm F3A Explorer PNP
Description
A year in the making! Introducing the new FMS F3A Explorer, the latest creation in the FMS Aerobatic line of models. With its elegant and graceful lines, superb flying qualities, the F3A is a must for the aerobatic pilot to add to his hangar. Working with RC Hobbyist’s worldwide, FMS has developed this aircraft to meet all the precision flying requirements needed to compete in F3A aerobatic competition.
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
Specification | |
Wingspan | 1020mm/40.2in |
Overall Length | 1120mm/44 in |
Flying Weight | Around 1000g/2.2 lb |
Motor Size | 3536-KV1250 |
ESC | 40A |
Servo | 9g servo x 4 |
Radio | 4 Channel |
CG (center of gravity) | 95mm (From Leading Edge) |
Prop Size | 11*5.5, 2 blade propeller |
Recommended Battery | Li-Po 11.1V 2200mAh |
Battery Connector | XT60 |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Retracts | No |
Approx. Flying Duration | 5 minutes |
Minimum Age Recommendation | 14+ |
Experience Level | Intermediate |
Assembly Time |
45 minutes |
FMS 1100mm MXS V2 PNP Green
Description
Introducing the version 2 1100mm MXS 3D aerobatic plane from FMS Models. Designed for the intermediate to advanced 3D pilot & built specifically for 3D Flight, the version 2 MSX is now even better to please the most capable of 3D pilots.
Built from super strong EPO foam, the receiver ready MXS is glueless - ready to assemble requiring only 10 screws. Add your 4 channel receiver and 3s 2200mAh battery and you are ready to fly. Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The updated powerful 3541 1230kv Outrunner, 40amp ESC, & 4 full Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired. Extra long, servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2 1/2” wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy!
Painted in bright green and black, the new version 2 MXS is sure to get attention at the flying field... Easy to assemble, built tough & 3D ready.... Look no further than the New MXS from FMS Models!
Features:
1. Easy to assemble. Only needs glue for wing tip Vortex generators.
2. New hollow wing design for reduced weight and rigidity.
3. Wing tip Side Force Generators for superior Knife Edge and slow maneuvering.
4. Super strong laminated control surface hinges.
5. Upgraded Powerful 35-41 1230kv Outrunner motor.
6. 40amp ESC.
7. Upgraded 4 digital full metal gear servos.
8. Wings and tail remove for transport, however the 1100mm size makes transportation easy.
9. New ultra-visible green & black high contrast paint scheme.
10. Upgraded extended Horizontal stabilizers and Vortex Generator for better performance.
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
Specification
|
|
Wingspan | 1100mm /43.3in |
Overall Length | 1080mm /42.5in |
Flying Weight | 1100g /38.8oz |
Motor Size | Brushless 3541-KV1230 |
ESC | 40A |
Servo | 13g digital full metal gear x 4 |
Radio | 4 Channel |
CG (center of gravity) | 85-90mm (From Leading Edge) |
Prop Size | 11*5.5 2 blade propeller |
Recommended Battery | Li-Po 14.8V 2600-3300mAh 35C |
Battery Connector | XT60 |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Retracts | No |
Approx. Flying Duration | 5 minutes |
Minimum Age Recommendation | 14+ |
Experience Level | Intermediate |
Assembly Time | 45 minutes |
Wing Load | 34g/ dm² (0.078oz/in²) |
Wing Area | 30.8dm² (478.7 sq.in) |
FMS 1400mm Pitts V2 PNP
Description
The Pitts Special is a light aerobatic biplane designed by Curtis Pitts. It has accumulated many competitions wins since its first flight in 1944. The Pitts biplanes dominated world aerobatic competition in the 1960s and 1970s and, even today, remain a potent competition aircraft in the lower categories.
Built upon the successful V1 Pitts biplane, FMS is proud to announce the brand-new Pitts V2. Redesigned with a massive 1400mm wingspan, the Pitts V2 is constructed of lightweight and robust EPO foam material. Proprietary connector plugs built into the wing structure means that the wings can be attached to and detached from the fuselage using just a few screws. The slide-fit wing struts are just as simple, slide them on in just a few seconds and the wing is securely braced!
An oversized battery bay accommodates most 6S packs with ease- giving the pilot ample power to attempt all aerobatic maneuvers. Hobbywing 50A ESC provides bulletproof performance!
While ensuring that the Pitts Special is faithfully recreated, FMS has worked hard to minimize its profit margins in the hopes that pilots who love the Pitts V2 will find it affordable.
With graceful lines from a bygone era, robust airframe and a state-of-the-art power system, the Pitts V2 is a model you shouldn’t miss!
Features:
1. Power: 4258 brushless motor, 50A Hobbywing-sourced ESC, 17g servos
2. Realistic trim scheme, rivets, panel lines and pilot figure
3. Screw-together assembly greatly reduces assembly time
4. Oversized battery compartment for larger, more powerful 6S packs
5. Robust and durable EPO construction
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
Specification | |
Wingspan | 1400mm/55.1in |
Overall Length | 1,298mm/51.1in |
Flying Weight | Around 3,500g |
Motor Size | Brushless 4258-KV460 |
ESC | 50A ESC with 5A BEC |
Servo | 17g Servo x 4 |
Radio | 4 Channel |
CG (center of gravity) | 155-165mm (From Leading Edge) |
Prop Size | 15x9 (2-blade) propeller |
Recommended Battery | Li-Po 22.2V 4000mAh 35C |
Battery Connector | EC5 |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Retracts | No |
Approx. Flying Duration | 5min |
Minimum Age Recommendation | 14+ |
Experience Level | Expert |
Assembly Time | 15-30 mins |
Wing Load | 72.5g/d㎡ |
Wing Area | 48.3d㎡ |