An Essential, Classic, and Realistic Civil Airplane

The Cessna 182 is a popular small single-engine propeller aircraft that first appeared in 1956. It plays a crucial role in general aviation and is widely used in various fields such as private flying, flight training, business cruising, aerial photography, aerial patrols, geographic surveyance, and emergency medical rescue.
Authorized by Textron Innovations Inc., the FMS 1500mm Cessna 182 adheres to the long-standing product philosophy of "Scale appearance, excellent performance," faithfully reproducing the appearance of the real aircraft and replicating its reliability, versatility, flexibility, and ease of operation. Whether you're a beginner pilot eager to progress or an enthusiast seeking recreational flying, the FMS Cessna 182 is undoubtedly a must-have choice.

What's In The Box

• 1500mm Cessna 182 PNP
• 3541-KV840 Motor (installed)
• 40A ESC with Reverse Thrust Function (installed)
• 7x 9g Plastic Digital Servo (installed)

Needed to Complete

• 6 Channel Transmitter and Receiver
• 4S 2200mAh-3200mAh 25c XT60 LiPo Battery 
• LiPo Battery Charger

Notes to buyers

• Recommend using 4S battery.
• ESC has overheat protection. For continuous flights, wait three minutes after changing each battery before taking off again.
• Floats and Reflex V3 are not included and need to be purchased separately.
• Using Reflex requires 7 channel transmitter and receiver.
• RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
• PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Specification

Weighing in at just 3800g and having over 5000g of thrust- the Beaver V2 is a trainer with predictable handling characteristics, a weekend flyer with STOL capabilities and is, quite surprisingly, an aerobatic powerhouse that could even hover, if you ask it to!
Realistic ailerons and flaps built into the hollowed-out wing structure gives the Beaver V2 excellent slow speed characteristics. Landing lights, navigation lights and working strobes give that final touch of realism while optional floats and glider hitch add to the versatility of this versatile aircraft.
Despite its large wingspan, the quick-release connector system on the wings and fuselage allow the Beaver to be easily transported.

The FMS 2000mm Beaver V2 builds on the success of the original FMS Beaver. Key differences include:
1. Upgraded interior- the Beaver V2 now features transparent windows with a cabin.
2. Upgraded landing gear- New ball-bearing equipped wheels minimize rolling resistance and increases the service life of the landing gear.
3. Servo connector built into the floats make float installation a breeze.
4. Different trim scheme- An attractive red trim scheme now adorns the FMS 2000mm Beaver V2

If you want versatile, endless fun- look no further than the FMS 2000mm Beaver V2!

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview

The world is always full of mavericks, and Maule was one of them. Can you believe it? While the whole world geared up to fly higher and faster, Maule was doing the opposite - to fly slower and lower- and he did it.
The FMS 1500mm model Maule replicates the low-speed handling and short take-off and landing (STOL) features of the real Maule to the greatest extent possible. Aided by lightweight and durable EPO foam and functional flaps, FMS Maule is capable of taking off within three meters.
In line with the product concept of "perfect appearance, excellent performance", FMS Maule includes an abundance of scale detail. From the crystal-clear cabin windows and interior decoration, to molded panel lines, antennas, rivets, vortex generators and functional LED lights, FMS Maule pushes the limits of restoration degree that can be achieved in an aircraft of the same size and type.
Maule can be equipped with two sets of landing gear - a tire set and a float set, for conquering any terrain year-round. The pre-installed 3S/4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or from water using the included float set.
FMS Maule - enjoy unparalleled flying pleasure.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
The FMS 1700mm PA-18 was launched in 2019, and its stable, easy-to-fly and easy-to-operate features have brought full surprises to both new and old pilots. While this trainer has been widely praised, FMS has been constantly asked whether it is possible to reduce the size of the aircraft, including the aircraft itself and the packaging, while maintaining its stability and operating controllability as much as possible, so that it can be picked up like a boarding suitcase.
With the 1300mm PA-18, FMS has answered the above question. The 1300mm PA-18 also adopts a two-section main wing and horizontal stability structure, but at the same time, the fuselage is also two-section, which greatly facilitates players' transportation and carrying. It can be hidden in the corner of a car trunk, ready to be used at any time.
Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized pneumatic rubber tires- the 1300mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.
In addition, the assembly steps of the 1300mm PA-18 are still simple and convenient, and the assembly and disassembly of the entire aircraft can be completed with just a few screws.
For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.
The latest 1300mm PA-18 could be a great start to enjoying versatile, fun and exceptionally relaxing flight.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
As a relative of the popular 1400mm J-3 Cub, the 1700mm PA-18 Super Cub retains great flight characteristics while offering increased power and wingspan.

Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized balloon tires- the 1700mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.

Utilizing the latest FMS hardware and design, the 1700mm PA-18 Super Cub has pre-installed ball-link type pushrods, integrated servo connectors in the wing structure and can be assembled very easily using no glue at all.

For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.

Versatile, fun and exceptionally relaxing to fly- the 1700mm PA-18 Super Cub is a great addition to any fleet!

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Introduction

The J3-Cub was first introduced in the 1930’s as an affordable trainer for the masses. Its success was cast in stone with the threat of WW2 and the Civilian Pilot Training Programme this resulted in the Cub being used to initially train over 80% of all American military pilots.

FMS have created a super detailed version of this aircraft and reduced assembly time. Giving you more time to enjoy the great flying characteristics of this 1400mm span Cub. There is plenty of thought gone into this aircraft and it shows with a high part count and scale detailing.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.

PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.