Specification

The Perfect RC Airplane For Beginners

The float-equipped airplane is now out of stock.

For pre-orders placed before October 29th, we have floats limited stock arriving on November 1st and 25th.
For pre-orders placed before December 2nd, we have floats limited stock arriving on December 9th.  
We will prioritize shipping for these orders, strictly following the order in which they were placed chronologically.

As the newest member of the FMS multi-purpose aircraft lineup, the 1220mm Ranger V2 retains all of the fantastic features that pilots have come to expect from FMS stable flight characteristics, ease of assembly, and realistic general-aviation inspired design.

Built with ultralight EPO foam, the large high-winged airframe configuration gives the Ranger stable flight characteristics and low wing-loading with extraordinary amounts of lift, even at slow speeds. Robust plastic struts give extra strength to the wings during aerobatic maneuvers and the patented high-strength “crash-proof” spring cushioned nose landing gear makes ground handling a breeze.

A great aircraft is nothing without a great, dependable power system. FMS has equipped the ranger with a 3136/1200KV outrunner motor with 20A Predator ESC, which allows the ranger to climb almost vertically on demand!

Featuring red, yellow, or green color schemes, the ranger can always be easily orientated even in overcast weather. Designed specifically for beginner pilots, the ranger boasts effortless assembly. Requiring only several screws and twist-locks to complete assembly, the longest wait time is the time it takes to charge the battery! Additionally, the two-piece design of the fuselage and main wing reduces packaging size by thirty percent, facilitating easy transport and storage!

Reflex V3, an onboard flight stabilization system, is factory installed. The Reflex system features Stabilized, Optimized and Manual flight modes. Reflex V3 is a trusty co-pilot that is perfect for pilots of any skill level.

Don’t miss out on one of the most revolutionary FMS aircraft, the amphibious ranger V2!

Notes to Buyers:

① RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
② PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
③ Due to a printing error, the packaging may indicate '1220mm Ranger V3 With Reflex V2.' The correct model is '1220mm Ranger V2 With Reflex V3.' 
④ A T6 Torx screwdriver is needed to install the vertical stabilizer's connecting rod. 
(Customers who have purchased Ranger V2 can log in to their account and redeem a FREE T6 Torx screwdriver with 100 points!)
⑤ For the float-equipped Ranger V2, the plane and floats will be sent as two separate packages.

The pinnacle of what a foam jet can be - Futura V3

The FMS Futura is a licensed sport jet developed by FMS in conjunction with Tomahawk- Aviation. Designed by a Sino-German team of engineers, the Futura represents the pinnacle of what a foam jet can be.
While retaining V1 features such as the CNC metal trailing-link landing gear for rough field operations, robust airframe with high-strength wing spars, oversized electronics bay, etc, and V2 features such as 13g all-metal digital servos for increased precision and torque, improved durable and reliable plug-type connectors, the FMS 80mm Futura V3 is upgraded with added alternately flashing navigation lights on the left and right wings and taxi lights on the bottom of the fuselage, and a recognizable and attractive red-grey paint scheme.
Powering the Futura V3 is an industry-leading Hobbywing 100A ESC paired with an uprated 3665-KV2000 motor turning an 80mm 12-bladed fan- delivering breathtaking power with absolute confidence.

What's in Box

(1) 80mm EDF with 12 bladed fan
(2) 3665-KV2000 Brushless Motor (installed)
(3) Hobbywing 100A ESC ESC (installed)
(4) 13g Digital All-metal Servos (installed)
(5) CNC All-metal Landing Gear (installed)
(6) Flashing Navigation Lights On Wings And Taxi Tights On the Bottom Of the Fuselage (installed)
(7) Attractive Red-gray Decal
(8) Product Manual

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview

The world is always full of mavericks, and Maule was one of them. Can you believe it? While the whole world geared up to fly higher and faster, Maule was doing the opposite - to fly slower and lower- and he did it.
The FMS 1500mm model Maule replicates the low-speed handling and short take-off and landing (STOL) features of the real Maule to the greatest extent possible. Aided by lightweight and durable EPO foam and functional flaps, FMS Maule is capable of taking off within three meters.
In line with the product concept of "perfect appearance, excellent performance", FMS Maule includes an abundance of scale detail. From the crystal-clear cabin windows and interior decoration, to molded panel lines, antennas, rivets, vortex generators and functional LED lights, FMS Maule pushes the limits of restoration degree that can be achieved in an aircraft of the same size and type.
Maule can be equipped with two sets of landing gear - a tire set and a float set, for conquering any terrain year-round. The pre-installed 3S/4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or from water using the included float set.
FMS Maule - enjoy unparalleled flying pleasure.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

By popular demand, FMS is proud to announce the re-release of the 1100mm P-51 racer; wearing the optional trim scheme of Dago Red, Miss America, Voodoo and Blue Thunder II.

Scale detailing and upgraded electronics are impeccably integrated: the FMS 1100mm P-51 racer features a realistic four-bladed propeller, forward tilting landing gear, functional flaps, scale cockpit, engine exhausts, air intake, wing fences and antenna.

Built with robust EPO material and painted with environmentally friendly water-based paint, the P-51 racer looks gorgeous at any speed and altitude. Reach speeds in excess of 90 mph thanks to the highly efficient four-bladed prop, 900kV motor, 80A ESC and 14.8V 2,600 mAh battery.

Feel the heart pounding exhilaration of an unlimited class air racer with the FMS 1100mm P-51 racer today!

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Innovative Design, 80MM Rafale RC EDF Jet

FMS 80mm Rafale features an attractive trim scheme, excellent scale details and fully functional canards- allowing the aircraft to be truly unique when compared to other 80mm EDF aircraft. Details such as the pilot, cockpit interior, panels, removable armaments, auxiliary fuel tanks, refueling probe, targeting sensor etc; dynamic features such as functional LED navigation and landing lights, CNC shock-absorbing electric retracts, functional canards and flaps etc.
Utilising screws, latches and quick connectors, experienced builders can complete the build process in as little as 5 minutes.
Functions such as delta-mixing, sequential landing gear bay doors, alternating flash navigation lights, nose gear landing lights, slowed flaps etc are all controlled by a central control board. An 80mm 12 bladed EDF with a platinum edition 3280 inrunner motor and 100A high performance ESC easily accomplishes fighter jets maneuvers with realistic sound and speed.

What's in Box

• 80mm EDF with 12 bladed fan
• 3280-2100KV Brushless Motor (installed)
• Hobbywing 100A ESC (installed)
• 13g Digital All-metal Servos (installed)
• CNC All-metal Landing Gear (installed)
• Flashing Navigation Lights On Wings And Taxi Tights On the Bottom Of the Fuselage (installed)
• Attractive Red-gray Decal
• Product Manual

Need to Complete

Transmitter
6+ channel Receiver
22.2V4000mAh-5000mAh 45c (recmmanded)
Compatible Charger

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Specification

After two-years of numerous flying tests and continuous improvements, the eagerly anticipated 1500mm P-47, is coming! The 1500mm P-47 features many new and innovative features over the original 1400mm P-47.

The new P-47 shows great detail by including 99% scaled control surface, landing gear cover, cockpit interiors, plastic cowling, gun turrets, retracted landing gear, and panel lines.

The original oil paint has been replaced by the latest environmental water-based paint. The water-based paint is environmental-friendly, and is designed to protect the foam parts under any condition. Additional structural changes include the lighter and larger EPO 52 foam, this change alleviates the airplane weight for an impressive flight performance, without weakening the airplane strength. The new CNC processed shock-absorbed front landing gear effectively helps to withstand those less than perfect landings. The control horn now adopts the new ball link design which helps provide a more accurate flight. The new 4258 KV460 motor coupled with our Predator high quality 80A ESC completes a stronger more powerful system. All servos are now metal gear digital servos. Furthermore, this 1500mm P-47 adopts the latest 2016 FMS electric retract. The 2016 FMS electric retract gets a commendable upgrade on both appearance and performance.

The P-47 has a lot of new customer-friendly features based on easy of assembly and transportation by eliminating the wiring problems. All channels on each wing are brought together in a fuselage to wing port. To complete installing the main wing set simply inserting the wing port into the fuselage half, then fixing the wing with four screws. 

The new P-47 is far more than a RC model, it is a great new addition to your RC Warbirds collection. If you like RC Warbirds, the 1500mm P-47 is a typical one that you cannot miss.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The FMS 1400mm T28 is going to get its fourth remarkable upgrade after it was launched three years ago. The 1400mm T28 V4 is coming!
 
No matter whether you had an FMS T28 or not before, the coming V4 is full of surprises. First of all, the foam ratio has been upgraded from EPO 40 to the lighter and larger EPO 52, which alleviates the airplane's weight, without weakening the airplane. Moreover, the original oil paint which has an unavoidable negative side effect of corrosion has been replaced by the latest environmental water-based paint.
 
Let’s take a look at more upgrades below.  The latest FMS multi-connector is also used for V4, which makes the assembly easy and simple while leaving the wires orderly and user-friendly. The 1400mm T28 V4 adopts the new design of ball linkage to remove the clearance and hit an accurate flight. The updated 4258 motor drives the power and speed around 30% higher. Both front and rear landing gears are metal, with a shock absorption function for hard landings. In terms of construction and performance, the 1400mm T28 V4 is totally different to the old versions. It is certain that the latest version greatly enhances flight appeal. Don't miss out on this thrilling experience.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

New from FMS, the new and highly detailed F/A-18F Super Hornet.

 The F/A-18F Super Hornet is a tandem-seat, carrier-capable, multirole fighter and attack aircraft based on the McDonnell Douglas F/A-18 Hornet. Designed and initially produced by McDonnell Douglas, the Super Hornet first flew in 1995. The Super Hornet entered service with the United States Navy in 1999, replacing the Grumman F-14 Tomcat, which was retired in 2006; the Super Hornet serves alongside the original Hornet.

 ROC HOBBY is proud to bring you this new and highly detailed 70mm ducted fan F/A-18F Super Hornet. Incorporating many of the new and advanced construction and assembly features such as the optimized screw based assembly, pre-installed ball links and a heavy-duty wing spar, the super hornet is quick to assemble and disassemble. Based on the original 64mm F/A-18 Hornet, the 70mm F/A-18F Super Hornet features rich details, clean lines, CNC-machined shock-absorbed landing gear sets, and a button-type canopy hatch. Included with the model are four decal sets that allows you to make your own Super Hornet and stand out in your airfield.

 The power system, which provides tremendous thrust and speed, utilizes our new and improved 70mm 12-blade EDF V2, KV1900 motor system. This brawny system, when coupled with a 6S battery, provides a resonating turbine engine sound. 

 The EPO material ensures the durability. The environmentally friendly water-based paint ensures vibrant and glossy color schemes. The significant input of the basic materials makes this airplane fantastic.

 Go get the Super Hornet and discover for yourself this new addition to ROC HOBBY’ growing EDF fleet.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Committed to the design and production of cutting-edge scale model aircraft, FMS has dedicated an extraordinary amount of effort in the design of the Yak 130 V2 to ensure that it’ll also be at the pinnacle of model aviation.
Finding a balance between scale and performance has always been a challenge, it took numerous prototypes, test flights and modifications to refine the Yak 130 V2 into its final form- FMS is confident that this is the most accurately defined Yak on the market today.
Small details such as the plastic leading edge of the air intake, which reduces turbulent airflow and protects the air duct from debris, are implemented onto the airframe. The panel lines, cockpit interior, scale pilot and even the auxiliary fuel tanks are made with significant attention to detail. Even the way the aircraft is assembled has been optimized- with a screw-together airframe, it’s now possible to build the Yak 130 V2 in the time it takes to charge the flight battery.
Utilizing the FMS 70mm 12-bladed EDF unit, Predator 2860-1850KV motor and an upgraded 80A ESC, the Yak 130 V2 has more than enough thrust to tackle the most demanding of maneuvers. Strong，upgraded metal landing gear set provide added support and strength to absorb the impact of less-than-perfect landings. All servos are pre-mounted and are optimized for this aircraft- ensuring absolute reliability and maneuverability.
Don’t settle for any less than the best- FMS Yak 130 V2

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.