Skill, know-how and space has always been limiting factors in bringing new enthusiasts into the wonderful world of R/C aviation, until now!
FMS has always been dedicated to enabling pilots of every skill level to enjoy the thrills of flight. Innovation then, is in our DNA.
FMS is proud to announce the 850mm Ranger. Like its sibling, the high winged airframe design with a tricycle landing gear, is very easy to fly by default. A dedicated flight control paired with a GPS sytem allows pilots to fly under beginner, intermediate and fully manual flight modes. An innovative flight perimeter fence and return to home functions provide bulletproof reliability and ease of mind- flying has never been so simple.

Flight perimeter fence function: if the aircraft is in excess of 120m away from the pilot, the aircraft will return to home automatically, with the pilot having the option of taking over the controls at any time. Once over the home point, the aircraft will circle at a 25m altitude at roughly 40km/h.
Return to home function: in the off chance that the pilot loses orientation of the aircraft, the return to home function can be triggered and the aircraft will fly back to the home point. Like the flight perimeter function, this function does not take away the pilots' ability to control the aircraft at any time.
Once over the home point, the Ranger 850 circles until further control inputs are given.
Absolute beginners rejoice! The FMS 850mm Ranger has everything that is needed for flight! A 12A esc/receiver combo reduces the need to connect cables and a 2315-3850kv motor, 7.4V 850mAh 25c battery and four 1.9g micro servos give the lightweight 305g aircraft incredible performance. Fly at a small park, basketball court or even your own back yard!
The innovative 850mm Ranger is the perfect way to start earning your wings!

Types Function:

PNP ( with Reflex V3): Have reflex function, without flight perimeter fence & return to home function.

Exclusive Innovative Reflex system allows pilots to fly under beginner, intermediate and fully manual flight modes. On Stabilized Mode, it can control surface travel allows tame flight characteristics for beginner pilots and can turn on an emergency recovery flight mode when lose control. On Optimized Mode, It Minimizes environmental effects on the airframe - pilot retains maximum control while the Reflex system neutralizes attitude changes caused by whin gusts. OFF Mode, Reflex system off - RC pilot can reach unlimited roll movement by themself improving skill.

RTF (with Gyro): 

Have flight perimeter fence & return to home function, without reflex function.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview
Maybe you're a new modeler looking for an easy-to-fly plane...or a more experienced pilot who wants the additional maneuverability of an aileron-equipped model.

Either way, the 1280 Easy Trainer is a great choice and suitable for a wide range of pilots. Featuring a top mount motor system with a pusher prop, designed to help the beginner by saving prop breakage, the design also lends itself to the beginner or even advance First Person View (FPV) pilot. No prop distortion. The small compact design makes it easy to carry to your flying site and be in the air quickly. 

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Weighing in at just 3800g and having over 5000g of thrust- the Beaver V2 is a trainer with predictable handling characteristics, a weekend flyer with STOL capabilities and is, quite surprisingly, an aerobatic powerhouse that could even hover, if you ask it to!
Realistic ailerons and flaps built into the hollowed-out wing structure gives the Beaver V2 excellent slow speed characteristics. Landing lights, navigation lights and working strobes give that final touch of realism while optional floats and glider hitch add to the versatility of this versatile aircraft.
Despite its large wingspan, the quick-release connector system on the wings and fuselage allow the Beaver to be easily transported.

The FMS 2000mm Beaver V2 builds on the success of the original FMS Beaver. Key differences include:
1. Upgraded interior- the Beaver V2 now features transparent windows with a cabin.
2. Upgraded landing gear- New ball-bearing equipped wheels minimize rolling resistance and increases the service life of the landing gear.
3. Servo connector built into the floats make float installation a breeze.
4. Different trim scheme- An attractive red trim scheme now adorns the FMS 2000mm Beaver V2

If you want versatile, endless fun- look no further than the FMS 2000mm Beaver V2!

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

FMS has always dedicated its engineering efforts towards making aircraft suitable for every skill level. The SuperEZ has always been a perfect beginner-friendly sport aircraft.
Using a large, high-winged design constructed out of lightweight EPO foam, the SuperEZ has an ultra-low wing loading and stable flight characteristics- giving beginner pilots great handling even at slow speeds. An improved brushless power system and propeller gives the aircraft ample power while still maintaining 10-15 minute flight times. A high strength, lightweight metal landing gear set absorbs even the hardest landings.
For easy transportation, the SuperEZ is designed with a quick-release mechanism that can release the wing in a matter of seconds.

Building on the success of the SuperEZ V2, the V3 features an improved one-piece horizontal stabilizer and a nose-cone that significantly reduces vibrations.
Built upon the successful Super EZ V3, FMS has completely upgraded the digital 9g servos to ensure pinpoint precision and bulletproof reliability. The addition of attractive purple accents to the color scheme make the Super EZ V4 a head-turner at every field!
Like the SuperEZ V2 and V3, the V4 can be installed with floats! Allowing for water and snow operations
As one of FMS’ mainline products, the SuperEZ V4 utilizes the latest in FMS’ design language. It will grow with the pilot as they progress into more sophisticated flight maneuvers.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

 Software Download Link

Simulated flight software has significant implications for novice remote control airplane enthusiasts. Firstly, it provides a safe, practical and cost-effective learning environment for beginners to learn and practice flying skills in a virtual setting. Secondly, simulated flight software can simulate various weather and environmental conditions, allowing beginners to experience different flight situations and adapt to different flying environments. Additionally, simulated flight software can help beginners learn the operating procedures and basic principles of aircraft, laying a solid foundation for their flying skills.

Furthermore, simulated flight software can also help remote control airplane enthusiasts and beginners better understand and familiarize themselves with different types of aircraft, their characteristics, and performance. This knowledge can assist beginners in selecting and configuring aircraft and enable them to proficiently master the control and operation skills of aircraft.

In summary, simulated flight software is of great significance for novice remote control airplane enthusiasts. It provides a safe, practical, and cost-effective learning environment, helps them to understand and master the operating procedures, basic principles, and skills of aircraft, and enables them to better enjoy the joy of flying.

Introduction

The J3-Cub was first introduced in the 1930’s as an affordable trainer for the masses. Its success was cast in stone with the threat of WW2 and the Civilian Pilot Training Programme this resulted in the Cub being used to initially train over 80% of all American military pilots.

FMS have created a super detailed version of this aircraft and reduced assembly time. Giving you more time to enjoy the great flying characteristics of this 1400mm span Cub. There is plenty of thought gone into this aircraft and it shows with a high part count and scale detailing.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.

PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.