8% OFF Airplanes
1 - 2 of 2 products
FMS 800mm T-28 Trojan V2 PNP Red
Description
Designed to replace the aging T-6 Texan, the T-28 Trojan was a piston engine military trainer aircraft used by both the US Air Force and the US Navy. The Navy continued to use this as the primary trainer right up to the early 1980’s.
FMS has chosen the most recognizable Navy color scheme for this outstanding flying model. Incorporating many scale features such as nose gear steering, dummy 9 cylinder radial engine, scale three blade prop and spinner make for an interesting model These features plus the power provided by the efficient brushless motor, will look great on the deck as well as screaming down the flying strip of your club.
With the Plug and Play version you will need your own Radio System of choice, Battery and Charger to be able to fly this model.
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
Wingspan | 800mm/31.5in |
Overall Length | 670mm/26.3in |
Flying Weight | Around 470g |
Motor Size | 3015-KV1700 Powerful Out runner Brushless Motor |
ESC | 20A Brushless ESC |
Servo | 9g Servo x 4 |
Radio | 4 Channel |
CG (center of gravity) | 45mm (From Leading Edge) |
Prop Size | 7*6, 3 Blade Propeller With Spinner |
Recommended Battery | Li-Po 7.4V 1300mAh 20C |
Battery Connector | JST |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Retracts | No |
Approx. Flying Duration | 6 minutes |
Minimum Age Recommendation | 14+ |
Experience Level | Beginner |
Assembly Time | 45 minutes |
FMS 1020mm F3A Explorer PNP
Description
A year in the making! Introducing the new FMS F3A Explorer, the latest creation in the FMS Aerobatic line of models. With its elegant and graceful lines, superb flying qualities, the F3A is a must for the aerobatic pilot to add to his hangar. Working with RC Hobbyist’s worldwide, FMS has developed this aircraft to meet all the precision flying requirements needed to compete in F3A aerobatic competition.
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
Specification | |
Wingspan | 1020mm/40.2in |
Overall Length | 1120mm/44 in |
Flying Weight | Around 1000g/2.2 lb |
Motor Size | 3536-KV1250 |
ESC | 40A |
Servo | 9g servo x 4 |
Radio | 4 Channel |
CG (center of gravity) | 95mm (From Leading Edge) |
Prop Size | 11*5.5, 2 blade propeller |
Recommended Battery | Li-Po 11.1V 2200mAh |
Battery Connector | XT60 |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Retracts | No |
Approx. Flying Duration | 5 minutes |
Minimum Age Recommendation | 14+ |
Experience Level | Intermediate |
Assembly Time |
45 minutes |