FPV

Meet SyncPilot – the slick head tracking system built by FMS and XF Robot for mid-to-close-range FPV action. It runs on its own dedicated 2.4G connection (no messy signal forwarding required), so you get plug-and-play simplicity for your FPV gear.

The system delivers universal compatibility with virtually all RC platforms - from multirotors and fixed-wing aircraft to surface vehicles. Under optimal conditions, it can achieve 1km ground operational range and 4km airborne range, making it the ideal solution for most mid-to-close-range FPV scenarios. Install the SyncPilot on your model and dive into head-tracking technology!

What's in the box:

• 1 x Headtracking Module
• 1 x Headtracking Transmitter
• 1 x SyncPilot Headtracking Receiver
• 1 x 5V Power Cable
• 1 x 3M Dual Lock™
• 1 x Product Manual
  
  

Q&A:

1. What is a Headtracker?
A Headtracker is a motion-based control system that translates head movements into real-time control signals. When mounted on FPV goggles, it wirelessly transmits these signals to the gimbal, which adjusts the camera's orientation, delivering a seamless and immersive FPV experience with responsive, real-time control.

2. What other equipment is needed to use the SyncPilot Headtracker Set?
You’ll need a gimbal, camera, video transmission system, and compatible FPV goggles for mounting the SyncPilot Headtracker Set.

3. Are there any other accessories available to complement the SyncPilot Headtracker?
Yes! We offer several accessories to enhance your FPV experience, including the VTX Mount & Cooling Fan, FPV Servo Gimbal, and FPV Cockpits for the FMS RC Airplanes, including the 1100mm PC-21 and 80mm BAE Hawk.

4. What if the gimbal moves in the opposite direction of my head?
Make sure the head tracking module is installed correctly. You can also use the head tracker software to adjust the direction and gain settings to match your preferred setup.

5. How is the head tracking module powered?
The head tracking module runs on an independent battery that is charged via a Type-C port for up to 1 hour and 15 minutes of use.

6. How is the head tracking receiver powered?
The head tracking receiver requires 5V power, which can be supplied through a direct connection to UBEC, the RC receiver, or the flight controller for quick and easy setup.

Specification:

Product:

FMS 5.8GHz Analog FPV System is a simple and user-friendly entry-level FPV setup.

What's in the box:

• 1 x 5.8GHz 4.3-inch FPV Monitor + Antenna
• 1 x 5.8GHz All-In-One Analog Camera
• 1 x Camera Housing With Mounting Base
• 1 x Monitor Mount
• 1 x 3.7V Battery (For Camera Use)
• 1 x 3.7V Battery Charger
• 1 x Hook-and-Loop Tape
• 1 x Adjustable Zip Ties
• 1 x Manual

How to Set Up:

1. Securely mount the camera on your RC vehicle (drone/car/boat) using the included hook-and-loop straps or zip ties.
2. Install the antenna before powering on the monitor, then use the auto-scan function to find the frequency.
3. Begin your FPV adventure!

Q&A:

1. Why doesn??£¤t the image look as clear as I expected?
Analog video transmission has lower resolution compared to HD systems, resulting in less sharpness. However, it offers low latency, making it great for close-range FPV (within 100 meters).

2. Why is the screen flickering and showing static (snow)?
This could be due to environmental interference. Try moving the screen further away from Wi-Fi routers or the transmitter. You can also switch the video transmission band or channel to see if that helps (check the manual for how to change the channel).

3. Why does the image look so blurry?
The camera??£¤s focus might not be properly adjusted. Try rotating the lens clockwise or counterclockwise until the image comes into sharp focus.

4. What is the operating endurance of the monitor and camera?
When fully charged, the monitor lasts up to 3 hours, while the camera provides up to 20 minutes of use.

5. What??£¤s the signal range of the 5.8GHz Analog FPV System?
The effective range is up to 150 meters in open areas without interference.

FPV Monitor Specification:

Camera Specification:

This product is used for the app BOGOS.io Free Gift BOGO Bundle to work.

Please do not delete/edit it while the offers are still running!
If you need assistance, please contact us via Live chat in-app or email us at: help@bogos.io.