VIP Adventurer
3280-KV2100 Motor For 80mm Rafale, 80mm Bae Hawk
Description
Predator 13g Digital Metal Gear Servo Reverse With 460mm Wire
Description
For 1700mm F7F, 70mm SU-27, 70mm J-11, 80mm BAE Hawk, 90mm Super Scorpion, 80mm F-86, 80mm Integral, 90mm Avanti, 90mm Super Scorpion V2
RC-Aircraft Lipo Battery Voltage Checker
Description
Accurate electronic digital screen.
Simple Connecting. Just plug the balance connector into the battery balance charging port to start operation.
SyncPilot Headtracker Set
Description
Meet SyncPilot – the slick head tracking system built by FMS and XF Robot for mid-to-close-range FPV action. It runs on its own dedicated 2.4G connection (no messy signal forwarding required), so you get plug-and-play simplicity for your FPV gear.
The system delivers universal compatibility with virtually all RC platforms - from multirotors and fixed-wing aircraft to surface vehicles. Under optimal conditions, it can achieve 1km ground operational range and 4km airborne range, making it the ideal solution for most mid-to-close-range FPV scenarios. Install the SyncPilot on your model and dive into head-tracking technology!
What's in the box:
- 1 x Headtracking Module
- 1 x Headtracking Transmitter
- 1 x SyncPilot Headtracking Receiver
- 1 x 5V Power Cable
- 1 x 3M Dual Lock™
- 1 x Product Manual
Q&A:
1. What is a Headtracker?
A Headtracker is a motion-based control system that translates head movements into real-time control signals. When mounted on FPV goggles, it wirelessly transmits these signals to the gimbal, which adjusts the camera's orientation, delivering a seamless and immersive FPV experience with responsive, real-time control.
2. What other equipment is needed to use the SyncPilot Headtracker Set?
You’ll need a gimbal, camera, video transmission system, and compatible FPV goggles for mounting the SyncPilot Headtracker Set.
3. Are there any other accessories available to complement the SyncPilot Headtracker?
Yes! We offer several accessories to enhance your FPV experience, including the VTX Mount & Cooling Fan, FPV Servo Gimbal, and FPV Cockpits for the FMS RC Airplanes, including the 1100mm PC-21 and 80mm BAE Hawk.
4. What if the gimbal moves in the opposite direction of my head?
Make sure the head tracking module is installed correctly. You can also use the head tracker software to adjust the direction and gain settings to match your preferred setup.
5. How is the head tracking module powered?
The head tracking module runs on an independent battery that is charged via a Type-C port for up to 1 hour and 15 minutes of use.
6. How is the head tracking receiver powered?
The head tracking receiver requires 5V power, which can be supplied through a direct connection to UBEC, the RC receiver, or the flight controller for quick and easy setup.
Specification:
|
|
45*28.2*4.2mm |
| Receiver Size | 38*22*15mm |
| Transmitter Size | 40*21*11.5mm |
| Gross Weight | 80g |
| Package Size | 135*90*55mm |
| Assembly Time | 5min |
| Headtracker Module Battery | 3.7V 300mAh |
| Operating Time on Full Charge | 1.25h |
| Operating Frequency | 2.4Ghz |
| Singal Range (Optimal Condition) | Surface 1km; Airborne 4km |
| Antenna | IPEX Omnidirectional T-type Antenna | Max. Gain 3dBi |
| Casing Material | ABS Plastic |
Product:
|
|
Price | Note |
| SyncPilot Headtracker Set | $99.99 | Includes transmitter & receiver |
| SyncPilot Headtracker Receiver | $39.99 | Includes receiver only |
| FPV Servo Gimbal (2-Axis) | $22.99 |
1. 3D Printed with ABS |
| VTX Mount & Cooling fan (O4 Pro) | $4.99 |
1. 3D Printed with TPU |
| VTX Mount & Cooling fan (O3) | $4.99 | 1. 3D Printed with TPU 2. Used with DJI O3 |
| VTX Mount & Cooling fan (Avatar) | $4.99 | 1. 3D Printed with TPU 2. Used with Caddx Avatar |
| 1100mm PC-21 FPV Cockpit | $26.99 | Used with FMS 1100mm PC-21 RC Airplane |
| 80mm BAE Hawk FPV Cockpit | $28.99 | Used with FMS 80mm BAE Hawk RC Airplane |
FMS RC Plane Rack
Description
The FMS RC Plane Rack is the ultimate storage solution for serious aviation enthusiasts!
In terms of structure, the entire rack is assembled with screws and clamps, making it easy to assemble while ensuring sturdiness. It comes with four casters (two with locks), which make it easy to organize your hangar space. The rack features five sets of foldable support arms, each with a 3° attack angle to secure planes without damaging control surfaces. The foldable design allows compatibility with model airplanes of different sizes, from wingspans of 800mm to 2000mm. Whether holding wings or fuselages, there’s always a suitable place.
In terms of appearance, the entire frame is made of aluminum alloy, measuring nearly 1.7m in height and weighing only 6.5kg. Its tactile matte black finish resists scratches and workshop grime. The rack supports a maximum weight of 50kg, so even large-sized model airplanes are no problem.
Hurry up and add this model airplane stand to your workshop!
| Specification | |
|---|---|
| Length | 1000mm/39inch |
| Width | 575mm/22inch |
| Height | 1680mm/66inch |
| Gross Weight | 6.9kg |
| Package Size |
|
| Assembly Time | 15min |
| Number of Support Arms | 5 Sets |
| Length of Support Arms | 310mm/122inch |
| Default Vertical Spacing Between Support Arms (Adjustable) | 300mm/188inch |
| Screw Quick Detach | YES |
| Color | Sanded Matte Black, Silver Joints |
| Material | Aluminum alloy, ABS Plastic |
| Load-bearing | Approx. 50 kg |
