The FMS 1400mm T28 is going to get its fourth remarkable upgrade after it was launched three years ago. The 1400mm T28 V4 is coming!
 
No matter whether you had an FMS T28 or not before, the coming V4 is full of surprises. First of all, the foam ratio has been upgraded from EPO 40 to the lighter and larger EPO 52, which alleviates the airplane's weight, without weakening the airplane. Moreover, the original oil paint which has an unavoidable negative side effect of corrosion has been replaced by the latest environmental water-based paint.
 
Let’s take a look at more upgrades below.  The latest FMS multi-connector is also used for V4, which makes the assembly easy and simple while leaving the wires orderly and user-friendly. The 1400mm T28 V4 adopts the new design of ball linkage to remove the clearance and hit an accurate flight. The updated 4258 motor drives the power and speed around 30% higher. Both front and rear landing gears are metal, with a shock absorption function for hard landings. In terms of construction and performance, the 1400mm T28 V4 is totally different to the old versions. It is certain that the latest version greatly enhances flight appeal. Don't miss out on this thrilling experience.
 

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview
The FMS F4U-4 Corsair is a remarkably scale tribute to this warbird icon that's a blast to fly. Sporting a pair of 90 degree rotating retractable landing gear, fully functional split flaps, and it 's powerful motor turning a scale like 4 bladed 14X8 prop, gives you all you need for slow gentle landings to high-speed strafing runs and spirited sport aerobatics


History
The Chance Vought F4U Corsair was a carrier-capable fighter aircraft that saw service primarily in World War II and the Korean War. Demand for the aircraft soon overwhelmed Vought's manufacturing capability, resulting in production by Goodyear and Brewster: Goodyear-built Corsairs were designated FG and Brewster-built aircraft F3A. From the first prototype delivery to the U.S. Navy in 1940, to final delivery in 1953 to the French, 12,571 F4U Corsairs were manufactured by Vought, in 16 separate models, it is the longest production run of any piston-engined fighter in U.S. history (1942–1953). The Corsair served in the U.S. Navy, U.S. Marines, Fleet Air Arm and the Royal New Zealand Air Force, as well as the French Navy Aéronavale and other, smaller air forces until the 1960s. It quickly became the most capable carrier-based fighter-bomber of World War II. Some Japanese pilots regarded it as the most formidable American fighter of World War II, and the U.S. Navy counted an 11:1 kill ratio with the F4U Corsair. As well as being an outstanding fighter, the Corsair proved to be an excellent fighter-bomber, serving almost exclusively in the latter role throughout the Korean War and during the French colonial wars in Indochina and Algeria.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The first of the giant 1700 series of aircraft to arrive is the fabulous P51 "Red Tail" Mustang. It features unbelievable scale finishing and best of all requires minimal effort as its simple assembly will have you ready to take to the skies in just several hours.

The airframe features a removable 2 piece wing that is simplistic in attachment and connection, the new FMS 'multi-pin plugs' mean that the complex wiring is now just a single connection per wing and not the usual plate full of spaghetti normally seen in lesser airframes.
The cockpit is adorned with the full complement of dials and levers and the hand painted pilot finishes the effect. Upfront, the scale shape spinner and reinforced nylon four blade propellor really does give a purposeful look. As you would expect, the huge brushless out- runner motor is mated with a top quality ESC enabling stunning flight performance.

Metal gear servos handle all the control surfaces and are fast with great centring performance. The resulting flight performance gives a finesse unseen in a ARTF in this class. Get yourself down your local model shop and order the 1700 Series P51 Mustang and steel the limelight at your airfield.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

FMS 1450MM P-51D V8 is here!

FMS is and will always be committed to developing the best foam aircraft worldwide.The latest version (V8) makes the historical P-51D even more attractive. Though the changes are not that significant, it shows our serious attitude to our products, and our continuing pursuit towards perfection.

Many consider the P51 as one of the most amazing warbird's and would like to have one in their collection. If you are one of the many, then the FMS 1400mm P-51D V8 is the right one for you. We believe that the current 1400mm P-51D V8 is one of the finest RC foam airplanes the world over.

Note: New V8 tails surfaces will not fit on the older versions of the P-51.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview
The Vought F4U Corsair was a carrier capable fighter aircraft, equipped with the largest available engine at the time, the Pratt & Whitney R2800, the engine had 18 cylinders and delivered over 2000hp . The first model of this aircraft was delivered as a prototype to the US Navy in 1940.

The FMS model of the F4U Corsair has many scale features including a beautiful 3 blade propeller and scale hub. The aircraft features a brushless motor, 20Amp ESC and 4 ready installed servos. Assembly, following the simple photo step by step assembly guide takes minutes. The EPO foam construction provides a light weight yet resilient airframe that will make your adrenaline fueled dog fights genuine fun. So what are you waiting for order today.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The FMS 1400mm T28 is going to get its fourth remarkable upgrade after it was launched three years ago. The 1400mm T28 V4 is coming!
 
No matter whether you had an FMS T28 or not before, the coming V4 is full of surprises. First of all, the foam ratio has been upgraded from EPO 40 to the lighter and larger EPO 52, which alleviates the airplane's weight, without weakening the airplane. Moreover, the original oil paint which has an unavoidable negative side effect of corrosion has been replaced by the latest environmental water-based paint.
 
Let’s take a look at more upgrades below.  The latest FMS multi-connector is also used for V4, which makes the assembly easy and simple while leaving the wires orderly and user-friendly. The 1400mm T28 V4 adopts the new design of ball linkage to remove the clearance and hit an accurate flight. The updated 4258 motor drives the power and speed around 30% higher. Both front and rear landing gears are metal, with a shock absorption function for hard landings. In terms of construction and performance, the 1400mm T28 V4 is totally different to the old versions. It is certain that the latest version greatly enhances flight appeal. Don't miss out on this thrilling experience.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The 2nd of FMS's mighty 980mm series aircraft has arrived! The P-40B is, like the 980mm P47,is definitely a head turner! If you love warbirds and enjoy the excitement of heart-pounding speeds,this aircraft will satisfy both of your desires! The stock 3 bladed props, 3648 brushless outrunner, 4 cell battery and 70A ESC means that the P-40B can attain speeds of up to 100mph+. Be ready to turn heads with the awesome 980mm P-40B!

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The World's First 1/24 Climbing Rock Crawler with Two-speed Transmission - Power Wagon FCX24

FCX24 meticulously designed by FMS team will redefine the small scale climbing rc car. As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. It is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.