VIP Adventurer
RC 3D Aerobatic Planes
Use the filter menu to find your desired model!
1 - 3 of 3 products
FMS 1100mm MXS V2 PNP Green
Description
Introducing the version 2 1100mm MXS 3D aerobatic plane from FMS Models. Designed for the intermediate to advanced 3D pilot & built specifically for 3D Flight, the version 2 MSX is now even better to please the most capable of 3D pilots.
Built from super strong EPO foam, the receiver ready MXS is glueless - ready to assemble requiring only 10 screws. Add your 4 channel receiver and 3S 2200mAh battery and you are ready to fly. Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The updated powerful 3541 1230kv Outrunner, 40amp ESC, & 4 full Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired. Extra long, servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2 1/2” wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy!
Painted in bright green and black, the new version 2 MXS is sure to get attention at the flying field... Easy to assemble, built tough & 3D ready.... Look no further than the New MXS from FMS Models!
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
| Wingspan | 1100mm /43.3in |
| Overall Length | 1080mm /42.5in |
| Flying Weight | 1100g /38.8oz |
| Motor Size | Brushless 3541-KV1230 |
| ESC | 40A |
| Servo | 13g digital full metal gear x 4 |
| Radio | 4 Channel |
| CG (center of gravity) | 85-90mm (From Leading Edge) |
| Prop Size | 11*5.5 2 blade propeller |
| Recommended Battery | 3S：11.1V 2200mAh - 2600mAh 25C 4S：14.8V 2200mAh - 2600mAh 35C |
| Battery Connector | XT60 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | No |
| Approx. Flying Duration | 5 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Intermediate |
| Assembly Time | 45 minutes |
| Wing Load | 34g/ dm² (0.078oz/in²) |
| Wing Area | 30.8dm² (478.7 sq.in) |
FMS 1400mm F3A Olympus PNP
Description
Overview
A year in the making! Introducing the new FMS F3A OLYMPUS, the latest creation in the FMS Aerobatic line of models. With its elegant and graceful lines, superb flying qualities, the F3A is a must for the aerobatic pilot to add to his hangar. Working with RC Hobbyist’s worldwide, FMS has developed this aircraft to meet all the precision flying requirements needed to compete in F3a aerobatic competition.
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
| Specification | |
| Wingspan | 1400 mm/ 55.1 in |
| Overall Length | 1548 mm/ 61 in |
| Flying Weight | Around 2400g /5.3lb |
| Motor Size | Brushless 4258-KV550 |
| ESC | 60A |
| Servo | 17g digital metal gear Servo x 4 |
| Radio | 4 Channel |
| CG (center of gravity) | 180-190mm (From Leading Edge) |
| Prop Size | 15*8 |
| Recommended Battery | Li-Po 22.2V 3300mAh 35C |
| Battery Connector | EC5 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | No |
| Retracts | No |
| Approx. Flying Duration | 6 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Intermediate |
| Assembly Time | 45 minutes |
| Wing Load | 60.8 g/dm²(20 oz/sq.ft) |
| Wing Area | 39.5 dm²/612 sq.in |
FMS 1020mm F3A Explorer PNP
Description
A year in the making! Introducing the new FMS F3A Explorer, the latest creation in the FMS Aerobatic line of models. With its elegant and graceful lines, superb flying qualities, the F3A is a must for the aerobatic pilot to add to his hangar. Working with RC Hobbyist’s worldwide, FMS has developed this aircraft to meet all the precision flying requirements needed to compete in F3A aerobatic competition.
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
| Specification | |
| Wingspan | 1020mm/40.2in |
| Overall Length | 1120mm/44 in |
| Flying Weight | Around 1000g/2.2 lb |
| Motor Size | 3536-KV1250 |
| ESC | 40A |
| Servo | 9g servo x 4 |
| Radio | 4 Channel |
| CG (center of gravity) | 95mm (From Leading Edge) |
| Prop Size | 11*5.5, 2 blade propeller |
| Recommended Battery | Li-Po 11.1V 2200mAh |
| Battery Connector | XT60 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | No |
| Retracts | No |
| Approx. Flying Duration | 5 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Intermediate |
| Assembly Time |
45 minutes |
