VIP Adventurer
FMS
Use the filter menu to find your desired model!
25 - 48 of 4071 products
-
US only Save $12.98
-
-
Europe Only Save $50.00
-
-
Save $50.00
-
-
-
-
-
-
-
-
-
FMS Customized 24 in 1 Multi-function Screwdriver Set (Aluminum Handle) In stock$15.99 USD$15.99 USD -
-
-
-
-
Anti-tank Gun/ Trailer/ Machine Gun/ Canvas Top for 1:6 / 1:12 1941 MB Scaler In stockFrom $6.99From $6.99
FMS 1:10 FCX10 LC80 Toyota Land Cruiser 80 RS
Description
| Length | 572mm |
| Width | 251mm |
| Height | 288mm |
| Wheelbase | 325mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 51° |
| Departure Angle | 42° |
| Ground Clearance | 76mm |
| Motor | 550 32T Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 6CH Remote Control System |
| Recommended Battery | 2S or 3S 5000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 40mm |
RC-Aircraft Lipo Battery Voltage Checker
Description
Accurate electronic digital screen.
Simple Connecting. Just plug the balance connector into the battery balance charging port to start operation.
FMS 1:24 FCX24 Mercedes-Benz Unimog 421 RTR
Description
| Length | 249mm |
| Width | 153mm |
| Height | 160mm |
| Wheelbase | 142mm |
| Tire F/R | Φ 20mm |
| Approach Angle | 49° |
| Departure Angle | 69° |
| Ground Clearance | 40mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS EDF Jet 70mm Viper V2 PNP 15th Anniversary Edition
Description
The 70mm Viper was not always the first choice for players transitioning from prop-driving airplane to jet – the original wire landing gear was not so friendly to pilots unfamiliar with jet takeoffs and landings – but now, she is! FMS 15th Anniversary Edition 70mm Viper, here we go!
There are a lot of FMS jet machines, but the 70mm Viper always soars above the crowd. The comment from players that the Viper “does any acrobatic trick you can throw at it" is a true portrayal of the excellent performance of this aircraft. The 15th anniversary edition of the Viper has been improved based on the previous work – switching out wire landing gear for a full set of CNC metal shock absorbing landing gear (A.K.A kneeling nose) – achieving simplicity, stability and ease of handling during the entire process of takeoff, flight and landing. Digital metal-toothed steering gear and ball-head joint rods provide precise control. The clip-on cockpit design facilitates battery access, and also effectively ensures that the cockpit will not fall off during violent flight. Lightweight EPO materials increase the durability and precision of the aircraft. The optimized airframe curves, long wings and wingtips reduce wind resistance and make the flight attitude of the entire aircraft clearer. 70mm 12-blade EDF unit, high speed brushless 3060 in-runner motor, 80A ESC, in combination with the recommended 6S 3300mAh lithium polymer battery, provide excellent vertical performance, speed range and instantaneous throttle response in flight. Perhaps even more fascinating is the sound the powertrain makes --it's almost like a real turbine.
Specification
| Wingspan | 1100mm /43.3 in |
| Overall Length | 1025mm / 40.4 in |
| Flying Weight | Around 1795 g |
| Motor Size | 3060-KV1900 inner running |
| ESC | 80A |
| Servo | 9g metal digital servo x 8 |
| Radio | 6 Channel |
| CG (center of gravity) | 90-95mm(From Leading Edge) |
| EDF | 70mm Ducted Fan 12-blade |
| Recommended Battery | 6S 3300mAh 35C |
| Battery Connector | EC5 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 4 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Intermediate |
| Assembly Time | 10-30 minutes |
| Wing Load | 93.5g/dm² ( oz/in²) |
| Wing Area | 19.2 dm² ( sq.in) |
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
FMS 1:24 FMT24 Chevrolet Colorado Monster Truck RTR
Description
| Length | 239mm |
| Width | 161mm |
| Height | 108mm |
| Wheelbase | 140mm |
| Tire F/R | D: 64.8mm, W: 33.4mm |
| Minimum Ground Clearance | 37mm |
| Approach Angle | 66° |
| Departure Angle | 53 ° |
| Motor | 370 brushed motor |
| Servo | 13g metal servo x 1, 9g servo x 1 |
| Battery | 2S Lipo 7.4V 900mAh 25C |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 20mins |
| Remote Control | G3 V3+ R3B transmitter, receiver with ESC group control board |
FMS EDF Jet 64mm Futura PNP
Description
| Wingspan | 900mm /35.4 in |
| Overall Length | 995mm /39.2 in |
| Flying Weight | Around 1150g |
| Motor Size | 2840 KV3150 |
| ESC | 40A |
| Servo | 9gX8pcs |
| Radio | 6CH Channel |
| CG (center of gravity) | 85-95mm |
| Prop Size | 64mm Ducted Fan 11-blade |
| Recommended Battery | 14.8V2200mAh-2600mAh 25c |
| Battery Connector | XT60 |
| Aileron | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | No |
| Approx. Flying Duration | 3 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Upper-Intermediate |
| Assembly Time | 10 minutes |
| Wing Load | 71.8 g/dm² ( 0.14oz/in²) |
| Wing Area | 16dm² ( 247.9 sq.in) |
FCX24/FCX18 Metal Differental
Description
For FCX18 Hummer EV, FCX24 Smasher, FCX24 Power Wagon, FCX24 K5 Blazer, FCX24 Lemur, FCX24 Unimog 421, FCX18 Land Cruiser 80, FCX18 K10, FCX24 K5 PRO, FCX18 Land Cruiser 80 Brushless, FCX24 K5 Black Brushless, FCX24 Power Wagon Brushless
FMS Model Airplane Stand / Holder
Description
Upgrade Parts - FCX24/FCX18 METAL TRANSMISSION GEAR
Description
Upgrade Parts For FCX24 Smasher, FCX24 Power Wagon, FCX24 K5 Blazer, FCX24 Lemur, FCX24 Unimog 421, FCX24 K5 Black Brushless, FCX24 Power Wagon Brushless
Normal Parts For FCX18 Land Cruiser 80, FCX18 K10
FMS Limited Customized Keychain
FMS 1:10 FCX10 Chevrolet K5 Blazer RS
Description
| Length | 548mm |
| Width | 249mm |
| Height | 285mm |
| Wheelbase | 324mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 58° |
| Departure Angle | 48° |
| Ground Clearance | 89mm |
| Motor | 550 Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 11CH Remote Control System |
| Recommended Battery | 2S Lipo 7.4V 2000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 30mm |
Propeller 12*7.5
Description
For 1700mm PA-18, 1800mm Ranger, 1700mm PA-18 V2
Upgrade Parts - 1:24 130 High Speed Motor
Description
For 1:24 Smasher, Power Wagon, K5 Blazer, Unimog 421
130 high-speed motor, with up to 40,000 rpm, and a maximum speed of 20km/h. Experience powerful climbing on rough and rocky roads, and feel the speed on open and flat roads.
Before purchasing the high-speed motor, be sure to pay attention to the following notes:
1. Please confirm whether the battery to be used with this motor is equipped with a PCM (protective circuit modul). If there is a PCM, you are advised to purchase a battery without, to avoid the situation that the ESC is turned off due to battery protection caused by excessive current.
2. Do not use more than three batteries in a row to prevent overheating damage to electronics or scalding on the user.
3. It is recommended to upgrade to metal transmission gears (C3062) while upgrading to the high-speed motor to avoid tooth sweeping.
4. It is recommended to add a heat sink (C3067) while upgrading to the high-speed motor to effectively reduce the motor temperature and prolong the life of the motor.
1220mm Ranger V2 Cowl (Red/Green/Yellow)
Description
The 1220mm Ranger Yellow V1 and V2 are using the same cowl (SKU=FMSRN105)
1500mm Cessna 182 (3-Blade) Propeller 11x6
Description
FMS Customized 24 in 1 Multi-function Screwdriver Set (Aluminum Handle)
Upgrade Parts - 1:24 METAL ROD SET
Description
For 1:24 Smasher, Power Wagon, K5 Blazer, Lemur, Unimog 421, FCX24 K5 PRO, FCX24 K5 Black Brushless, FCX24 Power Wagon Brushless
FMS 1500mm Maule with Floats RTF / PNP
Description
Overview
The world is always full of mavericks, and Maule was one of them. Can you believe it? While the whole world geared up to fly higher and faster, Maule was doing the opposite - to fly slower and lower- and he did it.
The FMS 1500mm model Maule replicates the low-speed handling and short take-off and landing (STOL) features of the real Maule to the greatest extent possible. Aided by lightweight and durable EPO foam and functional flaps, FMS Maule is capable of taking off within three meters.
In line with the product concept of "perfect appearance, excellent performance", FMS Maule includes an abundance of scale detail. From the crystal-clear cabin windows and interior decoration, to molded panel lines, antennas, rivets, vortex generators and functional LED lights, FMS Maule pushes the limits of restoration degree that can be achieved in an aircraft of the same size and type.
Maule can be equipped with two sets of landing gear - a tire set and a float set, for conquering any terrain year-round. The pre-installed 3S/4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or from water using the included float set.
FMS Maule - enjoy unparalleled flying pleasure.
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
Common Propeller 7.5*4
Description
FMS EDF Jet 90mm Avanti PNP 18th Anniversary Edition
Description
| Wingspan | 1290mm /50.8 in |
| Overall Length | 1360mm /53.5 in |
| Flying Weight | Around 3200g |
| Motor Size | 3670 KV1950 |
| ESC | 120A |
| Servo | 13gX8pcs |
| Radio | 6CH Channel |
| CG (center of gravity) | 125-135mm |
| Prop Size | 90mm Ducted Fan 12-blade |
| Recommended Battery | 22.2V 5000mAh-6000mAh 45c with EC5 connector |
| Aileron | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 3 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level |
Intermediate/Advanced
|
| Assembly Time | 10 minutes |
| Wing Load | 100 g/dm² (0.19oz/in²) |
| Wing Area | 32dm² (495.8 sq.in) |
Upgrade Parts - FCX24 High Speed Motor Set
Description
130 high-speed motor, with up to 40,000 rpm, and a maximum speed of 20km/h. Experience powerful climbing on rough and rocky roads, and feel the speed on open and flat roads.
Before purchasing the high-speed motor, be sure to pay attention to the following notes:
1. Please confirm whether the battery to be used with this motor is equipped with a PCM (protective circuit modul). If there is a PCM, you are advised to purchase a battery without, to avoid the situation that the ESC is turned off due to battery protection caused by excessive current.
2. Do not use more than three batteries in a row to prevent overheating damage to electronics or scalding on the user.
3. It is recommended to upgrade to metal transmission gears (C3062) while upgrading to the high-speed motor to avoid tooth sweeping.
4. It is recommended to add a heat sink (C3067) while upgrading to the high-speed motor to effectively reduce the motor temperature and prolong the life of the motor.
Upgrade Parts - FCX24/FCX18 BRASS STEERING SERVO ARM HORN BLACK
Description
Upgrade Parts For FCX24 Power Wagon, FCX24 Lemur, FCX18 Land Cruiser 80, FCX18 K10
Normal Parts For FCX18 Hummer EV, FCX18 LC80 Brushless, FCX24 Power Wagon Brushless
Anti-tank Gun/ Trailer/ Machine Gun/ Canvas Top for 1:6 / 1:12 1941 MB Scaler
Description
