VIP Adventurer
FMS
Use the filter menu to find your desired model!
49 - 72 of 4071 products
-
-
-
-
-
-
-
-
-
-
-
-
-
US onlyNew Save $62.98
-
-
-
Upgrade Parts - 130 MOTOR HEAT SINK
Description
For 1:24 Smasher, 1:24 Power Wagon, 1:24 K5 Blazer, Unimog 421, FCX24 Power Wagon Brushless
FMS EDF Jet 64mm F-16 Fighting Falcon PNP
Description
| Model | F-16 Thunderbird | F-16 Battlefield Gray |
| Wingspan | 712mm /28 in | 740mm /29.1 in |
| Overall Length | 1090mm /42.9 in | 1090mm /42.9 in |
| Flying Weight | Around 1070g | Around 1350g |
| Wing Load | 68 g/dm² ( 0.14oz/in²) | 85.4 g/dm² ( 0.17oz/in²) |
| Wing Area | 15.8 dm² ( 244.7 sq.in) | |
| Motor Size | 2840 KV3150 | |
| ESC | 40A | |
| EDF | 64mm Ducted Fan 12-blade | |
| Servo | 9gX6pcs | |
| Recommended battery | 14.8V2200mAh-2600mAh 25c with XT60 connector | |
| Radio | 6CH Channel | |
| CG (center of gravity) | 75-85mm | |
| Battery compartment size | 160x55x42mm | |
| Aileron | Yes | |
| Rudder | Yes | |
| Flaps | No | |
| Retracts | No | |
| Approx. Flying Duration | 3 minutes | |
| Minimum Age Recommendation | 14+ | |
| Assembly Time | 10minutes | |
FMS EDF Jet 80mm F-86 Sabre PNP
Description
| Wingspan | 1220mm /48 in |
| Overall Length | 1165mm /46 in |
| Flying Weight | Around 3050g |
| Motor Size | 3665-KV2000 |
| ESC | 100A |
| Servo | 13gX8, 9gX3 |
| Radio | 6 Channel |
| CG (center of gravity) | 180-190mm |
| Prop Size | 80mm Ducted Fan 12-blade |
| Recommended Battery | 22.2V 4000mAh-5500mAh 45c |
| Battery Connector | EC5 |
| Battery Compartment Size | 200*68*45mm |
| Aileron | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 3 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Upper-Intermediate |
| Assembly Time | 10 minutes |
| Wing Load | 95.3 g/dm² (0.18oz/in²) |
| Wing Area | 32dm² (495.8 sq.in) |
FMS 1:10 Toyota Land Cruiser FJ40 RS
Description
| Length | 571mm |
| Width | 268mm |
| Height | 326mm |
| Wheelbase | 339mm |
| Tire F/R | Φ 115mm |
| Approach Angle | 65° |
| Departure Angle | 40° |
| Ground Clearance | 82mm |
| Motor | 35T 550 Brushed motor |
| Remote control distance | 80m |
| Remote control | 2.4GHz Transmitter (Fibre Style) & Receiver Set |
PROPELLER 14*8 For 1400mm F4U V3, 1500mm P47
Description
For 1400mm F4U V3, 1500mm P47
RC Airplane Transmitter & Receiver Set (6 channel)
Description
For 1220mm Ranger, 1300mm PA-18, 1280mm Easy Trainer, 800mm F4U, 1220mm Super EZ, 800mm P‑51D, 1020mm F3A, 1400mm J-3, 1400mm Kingfisher, 64mm F-18 V2, 64mm F-35 V2, 64mm F-15 V2, 800mm F4U V2, 800mm Zero V2, 800mm T-28, 750mm Edge 540, 1020mm F3A, 1400mm F3A, 1400mm Pitts V2, 1500mm Moa, 800mm Easy Trainer, 1500mm Maule, 1700mm PA-18, 64mm Rafale, 3000mm Fox, 2300mm FOX, 1500mm Cessna, 2500mm ASW-17, 64mm Futura, 1800mm Ranger, 64mm F-16, 64mm J-10
1300mm PA-18 Supporting Bar Set
Description
FMS 1:18 FCX18 Hummer EV Pickup Truck RTR
Description
| Length | 328mm |
| Width | 138mm |
| Height | 133mm |
| Wheelbase | 199mm |
| Tire F/R | Φ 66*22mm |
| Minimum Ground Clearance | 40mm |
| Approach Angle | 51° |
| Departure Angle | 41° |
| Motor | 180 Brushed motor |
| Battery | 2S LiPo 7.4V 900mAh x1 |
| Remote control distance | 30m |
| Approx. operating duration time | 45mins |
| Remote control | MG41-BS transmitter，R4A3 receiver with ESC group control board |
FMS 1400mm Pitts V2 PNP
Description
The Pitts Special is a light aerobatic biplane designed by Curtis Pitts. It has accumulated many competitions wins since its first flight in 1944. The Pitts biplanes dominated world aerobatic competition in the 1960s and 1970s and, even today, remain a potent competition aircraft in the lower categories.
Built upon the successful V1 Pitts biplane, FMS is proud to announce the brand-new Pitts V2. Redesigned with a massive 1400mm wingspan, the Pitts V2 is constructed of lightweight and robust EPO foam material. Proprietary connector plugs built into the wing structure means that the wings can be attached to and detached from the fuselage using just a few screws. The slide-fit wing struts are just as simple, slide them on in just a few seconds and the wing is securely braced!
An oversized battery bay accommodates most 6S packs with ease- giving the pilot ample power to attempt all aerobatic maneuvers. Hobbywing 50A ESC provides bulletproof performance!
While ensuring that the Pitts Special is faithfully recreated, FMS has worked hard to minimize its profit margins in the hopes that pilots who love the Pitts V2 will find it affordable.
With graceful lines from a bygone era, robust airframe and a state-of-the-art power system, the Pitts V2 is a model you shouldn’t miss!
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
| Wingspan | 1400mm/55.1in |
| Overall Length | 1,298mm/51.1in |
| Flying Weight | Around 3,500g |
| Motor Size | Brushless 4258-KV460 |
| ESC | 50A ESC with 5A BEC |
| Servo | 17g Servo x 4 |
| Radio | 4 Channel |
| CG (center of gravity) | 155-165mm (From Leading Edge) |
| Prop Size | 15x9 (2-blade) propeller |
| Recommended Battery | Li-Po 22.2V 4000mAh 35C |
| Battery Connector | EC5 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | No |
| Retracts | No |
| Approx. Flying Duration | 5min |
| Minimum Age Recommendation | 14+ |
| Experience Level | Expert |
| Assembly Time | 15-30 mins |
| Wing Load | 72.5g/d㎡ |
| Wing Area | 48.3d㎡ |
FMS EDF Jet 80mm Futura V3 PNP
Description
The pinnacle of what a foam jet can be - Futura V3
The FMS Futura is a licensed sport jet developed by FMS in conjunction with Tomahawk- Aviation. Designed by a Sino-German team of engineers, the Futura represents the pinnacle of what a foam jet can be.
While retaining V1 features such as the CNC metal trailing-link landing gear for rough field operations, robust airframe with high-strength wing spars, oversized electronics bay, etc, and V2 features such as 13g all-metal digital servos for increased precision and torque, improved durable and reliable plug-type connectors, the FMS 80mm Futura V3 is upgraded with added alternately flashing navigation lights on the left and right wings and taxi lights on the bottom of the fuselage, and a recognizable and attractive red-grey paint scheme.
Powering the Futura V3 is an industry-leading Hobbywing 100A ESC paired with an uprated 3665-KV2000 motor turning an 80mm 12-bladed fan- delivering breathtaking power with absolute confidence.
What's in Box
(1) 80mm EDF with 12 bladed fan
(2) 3665-KV2000 Brushless Motor (installed)
(3) Hobbywing 100A ESC ESC (installed)
(4) 13g Digital All-metal Servos (installed)
(5) CNC All-metal Landing Gear (installed)
(6) Flashing Navigation Lights On Wings And Taxi Tights On the Bottom Of the Fuselage (installed)
(7) Attractive Red-gray Decal
(8) Product Manual
| Specification | |
| Wingspan | 1060mm/41.7in |
| Overall Length | 1170mm/46.1in |
| Flying Weight | Around 2500g |
| Motor Size | 3665-KV2000 |
| ESC | 100A |
| Servo | 13g metal analog Servo x 8 |
| Radio | 6 Channel |
| CG (center of gravity) | 100-105mm (From Leading Edge) |
| EDF | 80mm Ducted Fan 12-blade |
| Recommended Battery | Li-Po 22.2V 4000mAh 35C |
| Battery Connector | EC5 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 3-5 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Intermediate |
| Assembly Time | 15 minutes |
| Wing Load | 113.6g/dm² (0.26oz/in²) |
| Wing Area | 22dm² (341sq.in) |
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
FMS 1100mm P-51 Mustang V2 PNP
Description
By popular demand, FMS is proud to announce the re-release of the 1100mm P-51 racer; wearing the optional trim scheme of Dago Red, Miss America, Voodoo and Blue Thunder II.
Scale detailing and upgraded electronics are impeccably integrated: the FMS 1100mm P-51 racer features a realistic four-bladed propeller, forward tilting landing gear, functional flaps, scale cockpit, engine exhausts, air intake, wing fences and antenna.
Built with robust EPO material and painted with environmentally friendly water-based paint, the P-51 racer looks gorgeous at any speed and altitude. Reach speeds in excess of 90 mph thanks to the highly efficient four-bladed prop, 900kV motor, 80A ESC and 14.8V 2,600 mAh battery.
Feel the heart pounding exhilaration of an unlimited class air racer with the FMS 1100mm P-51 racer today!
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
| Specification | |
| Wingspan | 42.1in |
| Overall Length | 38.1in |
| Flying Weight | Around 1390 g |
| Motor Size | Brushless3948-900KV |
| ESC | 80A |
| Servo |
9g x 6pcs
|
| Radio | 6Channel |
| CG (center of gravity) | 70-80mm (From Leading Edge) |
| Prop Size | 10.5*8 4 |
| Recommended Battery | 14.8V 2600MAH 35C |
| Battery Connector | EC5 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 8min |
| Minimum Age Recommendation | 14+ |
| Experience Level | Expert |
| Assembly Time | 15mins |
| Wing Load | 67.1g/d㎡( 0.15oz/in²) |
| Wing Area | 20.7d㎡(320.8sq.in) |
SyncPilot Headtracker Set
Description
Meet SyncPilot – the slick head tracking system built by FMS and XF Robot for mid-to-close-range FPV action. It runs on its own dedicated 2.4G connection (no messy signal forwarding required), so you get plug-and-play simplicity for your FPV gear.
The system delivers universal compatibility with virtually all RC platforms - from multirotors and fixed-wing aircraft to surface vehicles. Under optimal conditions, it can achieve 1km ground operational range and 4km airborne range, making it the ideal solution for most mid-to-close-range FPV scenarios. Install the SyncPilot on your model and dive into head-tracking technology!
What's in the box:
- 1 x Headtracking Module
- 1 x Headtracking Transmitter
- 1 x SyncPilot Headtracking Receiver
- 1 x 5V Power Cable
- 1 x 3M Dual Lock™
- 1 x Product Manual
Q&A:
1. What is a Headtracker?
A Headtracker is a motion-based control system that translates head movements into real-time control signals. When mounted on FPV goggles, it wirelessly transmits these signals to the gimbal, which adjusts the camera's orientation, delivering a seamless and immersive FPV experience with responsive, real-time control.
2. What other equipment is needed to use the SyncPilot Headtracker Set?
You’ll need a gimbal, camera, video transmission system, and compatible FPV goggles for mounting the SyncPilot Headtracker Set.
3. Are there any other accessories available to complement the SyncPilot Headtracker?
Yes! We offer several accessories to enhance your FPV experience, including the VTX Mount & Cooling Fan, FPV Servo Gimbal, and FPV Cockpits for the FMS RC Airplanes, including the 1100mm PC-21 and 80mm BAE Hawk.
4. What if the gimbal moves in the opposite direction of my head?
Make sure the head tracking module is installed correctly. You can also use the head tracker software to adjust the direction and gain settings to match your preferred setup.
5. How is the head tracking module powered?
The head tracking module runs on an independent battery that is charged via a Type-C port for up to 1 hour and 15 minutes of use.
6. How is the head tracking receiver powered?
The head tracking receiver requires 5V power, which can be supplied through a direct connection to UBEC, the RC receiver, or the flight controller for quick and easy setup.
Specification:
|
|
45*28.2*4.2mm |
| Receiver Size | 38*22*15mm |
| Transmitter Size | 40*21*11.5mm |
| Gross Weight | 80g |
| Package Size | 135*90*55mm |
| Assembly Time | 5min |
| Headtracker Module Battery | 3.7V 300mAh |
| Operating Time on Full Charge | 1.25h |
| Operating Frequency | 2.4Ghz |
| Singal Range (Optimal Condition) | Surface 1km; Airborne 4km |
| Antenna | IPEX Omnidirectional T-type Antenna | Max. Gain 3dBi |
| Casing Material | ABS Plastic |
Product:
|
|
Price | Note |
| SyncPilot Headtracker Set | $99.99 | Includes transmitter & receiver |
| SyncPilot Headtracker Receiver | $39.99 | Includes receiver only |
| FPV Servo Gimbal (2-Axis) | $22.99 |
1. 3D Printed with ABS |
| VTX Mount & Cooling fan (O4 Pro) | $4.99 |
1. 3D Printed with TPU |
| VTX Mount & Cooling fan (O3) | $4.99 | 1. 3D Printed with TPU 2. Used with DJI O3 |
| VTX Mount & Cooling fan (Avatar) | $4.99 | 1. 3D Printed with TPU 2. Used with Caddx Avatar |
| 1100mm PC-21 FPV Cockpit | $26.99 | Used with FMS 1100mm PC-21 RC Airplane |
| 80mm BAE Hawk FPV Cockpit | $28.99 | Used with FMS 80mm BAE Hawk RC Airplane |
PROPELLER 13*9
Description
For 1400mm T-28 Red & Yellow.
FMS 1:10 Ford F100 Monster Truck 2WD RTR / RS
Description
| Product Size | 476 x 335 x 240mm |
| Wheelbase | 294mm |
| Tire Size | D130 x W70mm |
| Ground Clearance | 45mm |
| Motor | 550 Brushed Motor |
| Steering Servo | 15kg x 1 |
| Drive System | 2WD |
| Remote Control | FS-FMS-G4P1-BS |
| Receiver | FS-FMS-R4D-ESC-BS(40A) |
| Remote Control Distance | 150m |
| Recommended Battery | 2S Lipo Battery 7.4V 3000mah 30C with XT60 Connector |
| Battery Compartment | 152 x 49.5 x 30mm |
1220mm Ranger Wing Support Base Plastic Parts
Description
Suitable for 1220mm Ranger V1 & V2
FCX24/FCX18 STEERING SERVO
Description
For FCX18 Hummer EV, FCX24 Smasher, FCX24 Power Wagon, FCX24 K5 Blazer, FCX24 Lemur, FCX24 Unimog 421, FCX18 Land Cruiser 80, FCX18 K10, FCX24 K5 PRO, FCX18 Land Cruiser 80 Brushless, FCX24 K5 Black Brushless
FMS 1:10 FCX10 Land Rover Camel Trophy Edition RS
Description
Background
Land Rover has earned its place as a global leader in off-road vehicles, blending unmatched capability with innovative engineering. Iconic models like the Defender, Range Rover, and Discovery have proven their strength in extreme conditions and legendary events such as the Camel Trophy, cementing Land Rover’s reputation for endurance, resilience, and technology.
Defender
Since its debut in 1948, the Defender has become a symbol of rugged reliability. Trusted by military units, rescue teams, and off-road adventurers alike, its high ground clearance and durable design made it a standout in the Camel Trophy—where it came to embody resilience and toughness under the harshest conditions.
Range Rover
First launched in 1970, the Range Rover set the standard for combining luxury with proven off-road performance. Its presence in the Camel Trophy demonstrated that capability and refinement can go hand-in-hand, making it the ultimate choice for drivers seeking both prestige and adventure.
Discovery
Introduced in 1989, the Discovery struck a balance between off-road capability, everyday comfort, and family practicality. Designed for versatility, it excelled on rugged terrain while offering comfort and convenience for passengers—proving itself as a true adventure-ready SUV.
Land Rover Legacy
Land Rover is more than a vehicle manufacturer—it is a global symbol of exploration and adventure. The brand’s deep connection to the Camel Trophy helped define its identity, inspiring generations of enthusiasts to embrace discovery, endurance, and freedom. With a legacy built on toughness, innovation, and iconic design, Land Rover continues to shape the future of off-road driving.
Introduction
FMS proudly introduces the 1/10 scale Land Rover Camel Trophy Series, featuring officially licensed models of the Defender, Range Rover, and Discovery. Built on the proven FCX10 chassis, these RC crawlers deliver trail-tested durability and performance worthy of the Land Rover name.
Each model is packed with scale-accurate details, including side mirrors, snorkels, working spotlights, and a fully detailed interior. The durable PC soft plastic body comes with pre-installed headlights, reverse lights, and mudguards, ensuring both realism and rugged protection.
The FCX10 chassis is engineered for stability and control, with a front-center motor layout, four-link suspension, and straight axles at both the front and rear to maximize traction. A low-mounted motor and transmission unit lowers the center of gravity, helping reduce rollovers and keep the vehicle planted on challenging terrain.
Ready for adventure, the FMS Land Rover Camel Trophy Series combines authentic design with practical trail performance, capturing the legendary spirit of Land Rover in every drive.
What’s in the Box:
- 1 × FCX10 Land Rover RS
- 1 × MG6 6-Channel Transmitter
- 1 × R6D-ESC-BS Receiver (pre-installed)
- 1 × 550 Brushed Motor 32T (pre-installed)
- 1 × Product Manual
Needed to Complete:
- 4 × AA Batteries for the transmitter
- Battery & Charger for the kit (Recommended: 2S or 3S 5000mAh with XT60 plug)
Note to Buyer:
- This product is recommended for ages 14 and up. Children under 14 should use it only under adult supervision.
- Receivers may vary between old and new versions. Old version: Turn signals remain always on. New version: Turn signals can be switched on or off by the user.
Specification:
| Model | Discovery | Range Rover | Defender 110 |
| Length | 609mm | 588mm | 577mm |
| Height | 341mm | 290mm | 337mm |
| Width | 293mm | 263mm | 243mm |
| Wheelbase | 321mm | 321mm | 326mm |
| Tires | 120mm | 110mm | 110mm |
| Wheels (Dia. & Width) | 66mm, 26mm | 66mm, 26mm | 66mm, 26mm |
| Approach Angle | 49° | 43° | 48° |
| Departure Angle | 39° | 38° | 39° |
| Minimum Ground Clearance |
68mm | 62mm | 62mm |
| Motor | 550 Brushed Motor 32T | ||
| Recommend Battery | 2S or 3S 5000mAh with XT60 plug | ||
Download:
| Body Assembly Instructions |
Discovery | Range Rover | Defender 110 |
| Steel Wire Assembly Instructions |
Discovery | Range Rover | Defender 110 |
| Anti-Riot Net Assembly Instruction |
/ | / | Defender 110 |
