The Perfect RC Airplane For Beginners

As the newest member of the FMS multi-purpose aircraft lineup, the 1220mm Ranger V2 retains all of the fantastic features that pilots have come to expect from FMS stable flight characteristics, ease of assembly, and realistic general-aviation inspired design.

Built with ultralight EPO foam, the large high-winged airframe configuration gives the Ranger stable flight characteristics and low wing-loading with extraordinary amounts of lift, even at slow speeds. Robust plastic struts give extra strength to the wings during aerobatic maneuvers and the patented high-strength “crash-proof” spring cushioned nose landing gear makes ground handling a breeze.

A great aircraft is nothing without a great, dependable power system. FMS has equipped the ranger with a 3136/1200KV outrunner motor with 20A Predator ESC, which allows the ranger to climb almost vertically on demand!

Featuring red, yellow, or green color schemes, the ranger can always be easily orientated even in overcast weather. Designed specifically for beginner pilots, the ranger boasts effortless assembly. Requiring only several screws and twist-locks to complete assembly, the longest wait time is the time it takes to charge the battery! Additionally, the two-piece design of the fuselage and main wing reduces packaging size by thirty percent, facilitating easy transport and storage!

Reflex V3, an onboard flight stabilization system, is factory installed. The Reflex system features Stabilized, Optimized and Manual flight modes. Reflex V3 is a trusty co-pilot that is perfect for pilots of any skill level.

Don’t miss out on one of the most revolutionary FMS aircraft, the amphibious ranger V2!

Notes to Buyers:

① RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
② PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
③ For the float-equipped Ranger V2, the plane and floats will be sent as two separate packages.

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
The FMS 1700mm PA-18 was launched in 2019, and its stable, easy-to-fly and easy-to-operate features have brought full surprises to both new and old pilots. While this trainer has been widely praised, FMS has been constantly asked whether it is possible to reduce the size of the aircraft, including the aircraft itself and the packaging, while maintaining its stability and operating controllability as much as possible, so that it can be picked up like a boarding suitcase.
With the 1300mm PA-18, FMS has answered the above question. The 1300mm PA-18 also adopts a two-section main wing and horizontal stability structure, but at the same time, the fuselage is also two-section, which greatly facilitates players' transportation and carrying. It can be hidden in the corner of a car trunk, ready to be used at any time.
Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized pneumatic rubber tires- the 1300mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.
In addition, the assembly steps of the 1300mm PA-18 are still simple and convenient, and the assembly and disassembly of the entire aircraft can be completed with just a few screws.
For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.
The latest 1300mm PA-18 could be a great start to enjoying versatile, fun and exceptionally relaxing flight.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Introduction:

The Toyota LC80, also known as the Toyota Land Cruiser 80 series, is a four-wheel drive SUV model produced by Toyota Motor Corporation in the 1990s. First released in 1990, the LC80 quickly became popular worldwide, especially among off-road enthusiasts and outdoor adventurers. Because of its excellent off-road performance, reliability, durability, and comfort, the LC80 series models are one of the preferred models for explorers, off-road enthusiasts, and many special function departments all over the world, as well as one of the most popular off-road vehicles all over the world. Although it has been discontinued for many years, its legendary status and influence remains.

What's in the box:

• 1 x 1:18 FCX18 LC80 RTR
• 1 x Transmitter
• 1 x Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 7.4V 900mAh Battery
• 1 x USB Battery Charger
• 1 x Product Manual

Need to Complete:

• 4 x AAA Batteries for Transmitter

Specification:

Introduction:

Relive the 1970s classics, reproduce the American hard road style.
In 1969, Chevrolet's first-generation K5 Blazer came out. It was the representative of the famous Chevrolet C/K series and was the most compact full-size SUV on the market at the time. The vehicle is positioned as a full-size sport utility vehicle and is also GM's smallest full-size SUV. It combines Scout's excellent off-road capability with an automatic transmission, which reduces the difficulty of operation and enhances the pleasure of operation. Even people without off-road driving experience can easily drive this car. More people can experience the joy of adventure and long-distance travel to unknown destinations.

What's in the box:

1 x 1:24 K5 Blazer RTR
1 x Transmitter
1 x  Receiver (installed)
1 x 130 Brushed Motor (installed)
1 x 7.4V 380mAh Battery
1 x USB Battery Charger
1 x Product Manual

Needed to Complete:

4 x AAA Batteries for Transmitter

Specification:

The World's First 1/24 Climbing Rock Crawler with Two-speed Transmission - Power Wagon FCX24

FCX24 meticulously designed by FMS team will redefine the small scale climbing rc car. As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. It is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.

Introduction:

The development of the Chevrolet K10 can be traced back to the early 1960s. During that period, the demand for pickup trucks in the American automotive market began to grow, especially for industrial, agricultural, and outdoor activities, where a robust and durable pickup truck was needed. In this context, Chevrolet, as a brand under General Motors, introduced the first-generation C/K series pickup trucks aimed at meeting these demands, and the Chevrolet K10 was one of them. Over time, the Chevrolet K10 underwent continuous improvements and upgrades to adapt to the ever-changing market demands and technological advancements. It evolved from a simple and practical workhorse to a stylish and multifunctional pickup truck, catering to various needs from utilitarian to luxurious.

What's in the box:

• 1 x 1:18 FCX18 K101 x MG41-BS Transmitter
• 1 x R4A1 Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 7.4V 900mAh Battery (installed)
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Need to Complete:

• 4 x AAA Batteries for Transmitter

Specification:

Introduction

Scale Authenticity Meets Off-Road Adventure

The FMS Tacoma brings the rugged spirit of Toyota’s legendary pickup into the world of RC. This officially licensed 1:24-scale crawler blends true-to-scale design with serious off-road performance in a compact, go-anywhere crawler.

From the ABS hard body to the molded grille, mirrors, door handles, and bumpers—every detail is captured. It’s available in three factory-matched colors—Gray, Red, and Blue.

Built on the next-generation FCX24M chassis, the Tacoma features a 153mm (6.02") extended wheelbase, ladder-frame construction, and solid axles for increased durability and torque control. The all-new off-road tires deliver excellent grip and ground clearance, giving this micro-crawler big-truck performance.

Powered by a high-torque 050 motor and equipped with a two-speed transmission, the Tacoma is ready to crawl slowly or hit top speed on demand. The included 2S 380 mAh LiPo battery delivers up to 30 minutes of runtime per charge.

Whether you’re building micro-terrain indoors or taking on backyard trails, the FMS Tacoma is ready for whatever comes next. It’s not just a model—it’s an RC tribute to one of the most dependable off-road trucks ever built.

What’s in the Box:

• 1 × 1:24 FCX24M Toyota Tacoma RTR (with installed electronics)
• 1 × 2.4GHz G3 Transmitter
• 1 × R3A Receiver (pre-installed)
• 1 × 050 Brushed Motor (pre-installed)
• 1 × Product Manual

Needed to Complete:

• 4 × AAA Batteries for the Transmitter
  

Specification: